Pin assignments — nRF52¶
36 VARIANTS · SIGNAL NAME · GPIO · SOURCE LINE
Which pin of the nRF52 connects to what, per variant in the firmware repo. This is a reference page for anyone who builds, measures or wants to understand a board — which device you can buy is in Node matrix, and what sits inside the chip per family is in The four platform families.
Note
Source. MeshCore v1.17.1, commit
d929643, 14 August 2026 — variants/*/platformio.ini and the
headers in the same directory. Reproduce with
tools/variant-pins.py:
python3 tools/variant-pins.py --repo ../MeshCore \
--familie nRF52 --markdown --taal en --kopniveau 3
Commented-out lines do not count. A #define inside #if 0 does: the
script cannot tell the difference.
How to read these tables¶
Per variant the signals are grouped: LoRa radio, I2C, SPI, display, GPS, buttons and LED, power and battery, and whatever falls outside that. Each line names the file and line number where the definition sits, so you can check it yourself.
The value is sometimes not a number but another name — P_LORA_NSS then
points at LORA_CS, which sits a few lines up with the real number. The
first occurrence wins: if a name appears twice, the second is an alias.
Constants that look like a pin but are not do not appear in the table.
LORA_TX_POWER, SX126X_DIO3_TCXO_VOLTAGE and BLE_PIN_CODE are radio and
firmware settings; the script reports them separately.
The nRF52 variants put their pins in variant.h or pins_arduino.h. Across
the thirty-six variants, 1463 signals come from a header and 430 from the
build_flags. Mind the notation: 149 values read (0 + 30) or (32 + 10).
That is the port number times 32 plus the pin number, so P0.30 and P1.10.
The variants¶
gat562_30s_mesh_kit¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.180 |
P_LORA_DIO_1 |
(47) |
variant.h l.181 |
P_LORA_MISO |
(45) |
variant.h l.179 |
P_LORA_MOSI |
(44) |
variant.h l.178 |
P_LORA_NSS |
(42) |
variant.h l.176 |
P_LORA_RESET |
(38) |
variant.h l.175 |
P_LORA_SCLK |
(43) |
variant.h l.177 |
P_LORA_TX_LED |
LED_GREEN |
variant.h l.82 |
SX126X_POWER_EN |
(37) |
variant.h l.174 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
14 |
platformio.ini l.11 |
PIN_BOARD_SDA |
13 |
platformio.ini l.12 |
PIN_WIRE_SCL |
(14) |
variant.h l.192 |
PIN_WIRE_SDA |
(13) |
variant.h l.191 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(29) |
variant.h l.163 |
PIN_SPI_MOSI |
(30) |
variant.h l.164 |
PIN_SPI_SCK |
(3) |
variant.h l.165 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(33) |
variant.h l.219 |
PIN_GPS_PPS |
(17) |
variant.h l.220 |
PIN_GPS_RX |
PIN_SERIAL1_TX |
variant.h l.218 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
variant.h l.217 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(9) |
variant.h l.88 |
PIN_BUTTON2 |
(28) |
variant.h l.89 |
PIN_BUTTON3 |
(4) |
variant.h l.90 |
PIN_BUTTON4 |
(30) |
variant.h l.91 |
PIN_BUTTON5 |
(31) |
variant.h l.92 |
PIN_BUTTON6 |
(26) |
variant.h l.93 |
PIN_LED1 |
(35) |
variant.h l.69 |
PIN_LED2 |
(36) |
variant.h l.70 |
PIN_LED3 |
(29) |
variant.h l.71 |
PIN_USER_BTN |
PIN_BUTTON6 |
variant.h l.100 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(5) |
variant.h l.105 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.64 |
PINS_COUNT |
(48) |
variant.h l.63 |
PIN_A0 |
(5) |
variant.h l.113 |
PIN_A1 |
(31) |
variant.h l.114 |
PIN_A2 |
(28) |
variant.h l.115 |
PIN_A3 |
(29) |
variant.h l.116 |
PIN_A4 |
(30) |
variant.h l.117 |
PIN_A5 |
(31) |
variant.h l.118 |
PIN_A6 |
(0xff) |
variant.h l.119 |
PIN_A7 |
(0xff) |
variant.h l.120 |
PIN_AREF |
(2) |
variant.h l.141 |
PIN_BACK_BTN |
PIN_BUTTON1 |
variant.h l.94 |
PIN_BUZZER |
33 |
platformio.ini l.19 |
PIN_NFC1 |
(9) |
variant.h l.142 |
PIN_NFC2 |
(10) |
variant.h l.143 |
PIN_OLED_RESET |
-1 |
platformio.ini l.13 |
PIN_QSPI_CS |
26 |
variant.h l.200 |
PIN_QSPI_IO0 |
30 |
variant.h l.201 |
PIN_QSPI_IO1 |
29 |
variant.h l.202 |
PIN_QSPI_IO2 |
28 |
variant.h l.203 |
PIN_QSPI_IO3 |
2 |
variant.h l.204 |
PIN_QSPI_SCK |
3 |
variant.h l.199 |
PIN_SERIAL1_RX |
(15) |
variant.h l.151 |
PIN_SERIAL1_TX |
(16) |
variant.h l.152 |
PIN_SERIAL2_RX |
(19) |
variant.h l.155 |
PIN_SERIAL2_TX |
(20) |
variant.h l.156 |
PIN_WIRE1_SCL |
(25) |
variant.h l.195 |
PIN_WIRE1_SDA |
(24) |
variant.h l.194 |
WS2812_PIN |
PIN_LED3 |
variant.h l.75 |
gat562_mesh_evb_pro¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.166 |
P_LORA_DIO_1 |
(47) |
variant.h l.167 |
P_LORA_MISO |
(45) |
variant.h l.165 |
P_LORA_MOSI |
(44) |
variant.h l.164 |
P_LORA_NSS |
(42) |
variant.h l.162 |
P_LORA_RESET |
(38) |
variant.h l.161 |
P_LORA_SCLK |
(43) |
variant.h l.163 |
SX126X_POWER_EN |
(37) |
variant.h l.160 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
14 |
platformio.ini l.9 |
PIN_BOARD_SDA |
13 |
platformio.ini l.10 |
PIN_WIRE_SCL |
(14) |
variant.h l.178 |
PIN_WIRE_SDA |
(13) |
variant.h l.177 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(29) |
variant.h l.149 |
PIN_SPI_MOSI |
(30) |
variant.h l.150 |
PIN_SPI_SCK |
(3) |
variant.h l.151 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(33) |
variant.h l.205 |
PIN_GPS_PPS |
(17) |
variant.h l.206 |
PIN_GPS_RX |
PIN_SERIAL1_TX |
variant.h l.204 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
variant.h l.203 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(9) |
variant.h l.86 |
PIN_LED1 |
(35) |
variant.h l.69 |
PIN_LED2 |
(36) |
variant.h l.70 |
PIN_USER_BTN |
PIN_BUTTON1 |
variant.h l.88 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(5) |
variant.h l.92 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.64 |
PINS_COUNT |
(48) |
variant.h l.63 |
PIN_A0 |
(5) |
variant.h l.99 |
PIN_A1 |
(31) |
variant.h l.100 |
PIN_A2 |
(28) |
variant.h l.101 |
PIN_A3 |
(29) |
variant.h l.102 |
PIN_A4 |
(30) |
variant.h l.103 |
PIN_A5 |
(31) |
variant.h l.104 |
PIN_A6 |
(0xff) |
variant.h l.105 |
PIN_A7 |
(0xff) |
variant.h l.106 |
PIN_AREF |
(2) |
variant.h l.127 |
PIN_BACK_BTN |
PIN_BUTTON1 |
variant.h l.87 |
PIN_NFC1 |
(9) |
variant.h l.128 |
PIN_NFC2 |
(10) |
variant.h l.129 |
PIN_QSPI_CS |
26 |
variant.h l.186 |
PIN_QSPI_IO0 |
30 |
variant.h l.187 |
PIN_QSPI_IO1 |
29 |
variant.h l.188 |
PIN_QSPI_IO2 |
28 |
variant.h l.189 |
PIN_QSPI_IO3 |
2 |
variant.h l.190 |
PIN_QSPI_SCK |
3 |
variant.h l.185 |
PIN_SERIAL1_RX |
(15) |
variant.h l.137 |
PIN_SERIAL1_TX |
(16) |
variant.h l.138 |
PIN_SERIAL2_RX |
(19) |
variant.h l.141 |
PIN_SERIAL2_TX |
(20) |
variant.h l.142 |
PIN_WIRE1_SCL |
(25) |
variant.h l.181 |
PIN_WIRE1_SDA |
(24) |
variant.h l.180 |
gat562_mesh_tracker_pro¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.176 |
P_LORA_DIO_1 |
(47) |
variant.h l.177 |
P_LORA_MISO |
(45) |
variant.h l.175 |
P_LORA_MOSI |
(44) |
variant.h l.174 |
P_LORA_NSS |
(42) |
variant.h l.172 |
P_LORA_RESET |
(38) |
variant.h l.171 |
P_LORA_SCLK |
(43) |
variant.h l.173 |
SX126X_POWER_EN |
(37) |
variant.h l.170 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
14 |
platformio.ini l.9 |
PIN_BOARD_SDA |
13 |
platformio.ini l.10 |
PIN_WIRE_SCL |
(14) |
variant.h l.188 |
PIN_WIRE_SDA |
(13) |
variant.h l.187 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(29) |
variant.h l.159 |
PIN_SPI_MOSI |
(30) |
variant.h l.160 |
PIN_SPI_SCK |
(3) |
variant.h l.161 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(33) |
variant.h l.215 |
PIN_GPS_PPS |
(17) |
variant.h l.216 |
PIN_GPS_RX |
PIN_SERIAL1_TX |
variant.h l.214 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
variant.h l.213 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(9) |
variant.h l.86 |
PIN_BUTTON2 |
(28) |
variant.h l.87 |
PIN_BUTTON3 |
(4) |
variant.h l.88 |
PIN_BUTTON4 |
(30) |
variant.h l.89 |
PIN_BUTTON5 |
(31) |
variant.h l.90 |
PIN_BUTTON6 |
(26) |
variant.h l.91 |
PIN_LED1 |
(35) |
variant.h l.69 |
PIN_LED2 |
(36) |
variant.h l.70 |
PIN_USER_BTN |
PIN_BUTTON6 |
variant.h l.98 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(5) |
variant.h l.102 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.64 |
PINS_COUNT |
(48) |
variant.h l.63 |
PIN_A0 |
(5) |
variant.h l.109 |
PIN_A1 |
(31) |
variant.h l.110 |
PIN_A2 |
(28) |
variant.h l.111 |
PIN_A3 |
(29) |
variant.h l.112 |
PIN_A4 |
(30) |
variant.h l.113 |
PIN_A5 |
(31) |
variant.h l.114 |
PIN_A6 |
(0xff) |
variant.h l.115 |
PIN_A7 |
(0xff) |
variant.h l.116 |
PIN_AREF |
(2) |
variant.h l.137 |
PIN_BACK_BTN |
PIN_BUTTON1 |
variant.h l.92 |
PIN_NFC1 |
(9) |
variant.h l.138 |
PIN_NFC2 |
(10) |
variant.h l.139 |
PIN_OLED_RESET |
-1 |
platformio.ini l.11 |
PIN_QSPI_CS |
26 |
variant.h l.196 |
PIN_QSPI_IO0 |
30 |
variant.h l.197 |
PIN_QSPI_IO1 |
29 |
variant.h l.198 |
PIN_QSPI_IO2 |
28 |
variant.h l.199 |
PIN_QSPI_IO3 |
2 |
variant.h l.200 |
PIN_QSPI_SCK |
3 |
variant.h l.195 |
PIN_SERIAL1_RX |
(15) |
variant.h l.147 |
PIN_SERIAL1_TX |
(16) |
variant.h l.148 |
PIN_SERIAL2_RX |
(19) |
variant.h l.151 |
PIN_SERIAL2_TX |
(20) |
variant.h l.152 |
PIN_WIRE1_SCL |
(25) |
variant.h l.191 |
PIN_WIRE1_SDA |
(24) |
variant.h l.190 |
gat562_mesh_watch13¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.161 |
P_LORA_DIO_1 |
(47) |
variant.h l.162 |
P_LORA_MISO |
(45) |
variant.h l.160 |
P_LORA_MOSI |
(44) |
variant.h l.159 |
P_LORA_NSS |
(42) |
variant.h l.157 |
P_LORA_RESET |
(38) |
variant.h l.156 |
P_LORA_SCLK |
(43) |
variant.h l.158 |
SX126X_POWER_EN |
(37) |
variant.h l.155 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
14 |
platformio.ini l.12 |
PIN_BOARD_SDA |
13 |
platformio.ini l.13 |
PIN_WIRE_SCL |
(14) |
variant.h l.173 |
PIN_WIRE_SDA |
(13) |
variant.h l.172 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(29) |
variant.h l.144 |
PIN_SPI_MOSI |
(30) |
variant.h l.145 |
PIN_SPI_SCK |
(3) |
variant.h l.146 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(9) |
variant.h l.80 |
PIN_BUTTON2 |
(10) |
variant.h l.81 |
PIN_LED |
(-1) |
variant.h l.69 |
PIN_USER_BTN |
PIN_BUTTON1 |
variant.h l.82 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(5) |
variant.h l.87 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.64 |
PINS_COUNT |
(48) |
variant.h l.63 |
PIN_A0 |
(5) |
variant.h l.94 |
PIN_A1 |
(31) |
variant.h l.95 |
PIN_A2 |
(28) |
variant.h l.96 |
PIN_A3 |
(29) |
variant.h l.97 |
PIN_A4 |
(30) |
variant.h l.98 |
PIN_A5 |
(31) |
variant.h l.99 |
PIN_A6 |
(0xff) |
variant.h l.100 |
PIN_A7 |
(0xff) |
variant.h l.101 |
PIN_AREF |
(2) |
variant.h l.122 |
PIN_BACK_BTN |
PIN_BUTTON2 |
variant.h l.83 |
PIN_NFC1 |
(9) |
variant.h l.123 |
PIN_NFC2 |
(10) |
variant.h l.124 |
PIN_OLED_RESET |
-1 |
platformio.ini l.14 |
PIN_QSPI_CS |
26 |
variant.h l.181 |
PIN_QSPI_IO0 |
30 |
variant.h l.182 |
PIN_QSPI_IO1 |
29 |
variant.h l.183 |
PIN_QSPI_IO2 |
28 |
variant.h l.184 |
PIN_QSPI_IO3 |
2 |
variant.h l.185 |
PIN_QSPI_SCK |
3 |
variant.h l.180 |
PIN_SERIAL1_RX |
(15) |
variant.h l.132 |
PIN_SERIAL1_TX |
(16) |
variant.h l.133 |
PIN_SERIAL2_RX |
(19) |
variant.h l.136 |
PIN_SERIAL2_TX |
(20) |
variant.h l.137 |
PIN_WIRE1_SCL |
(25) |
variant.h l.176 |
PIN_WIRE1_SDA |
(24) |
variant.h l.175 |
heltec_mesh_solar¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
(24) |
variant.h l.92 |
P_LORA_BUSY |
17 |
MeshSolarBoard.h l.15 |
P_LORA_DIO_1 |
20 |
MeshSolarBoard.h l.12 |
P_LORA_MISO |
23 |
MeshSolarBoard.h l.17 |
P_LORA_MOSI |
22 |
MeshSolarBoard.h l.18 |
P_LORA_NSS |
24 |
MeshSolarBoard.h l.13 |
P_LORA_RESET |
25 |
MeshSolarBoard.h l.14 |
P_LORA_SCLK |
19 |
MeshSolarBoard.h l.16 |
SX126X_BUSY |
(17) |
variant.h l.94 |
SX126X_DIO1 |
(20) |
variant.h l.93 |
SX126X_RESET |
(25) |
variant.h l.95 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(26) |
variant.h l.45 |
PIN_WIRE_SDA |
(6) |
variant.h l.44 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(43) |
variant.h l.99 |
PIN_SPI1_MOSI |
(41) |
variant.h l.100 |
PIN_SPI1_SCK |
(40) |
variant.h l.101 |
PIN_SPI_MISO |
(23) |
variant.h l.55 |
PIN_SPI_MOSI |
(22) |
variant.h l.56 |
PIN_SPI_NSS |
(24) |
variant.h l.58 |
PIN_SPI_SCK |
(19) |
variant.h l.57 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.78 |
LED_PIN |
LED_BUILTIN |
variant.h l.67 |
PIN_BUTTON1 |
(42) |
variant.h l.77 |
PIN_LED |
LED_BUILTIN |
variant.h l.64 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.83 |
Other
| Signal | Value | Source |
|---|---|---|
BQ4050_EMERGENCY_SHUTDOWN_PIN |
(35) |
variant.h l.127 |
BQ4050_SCL_PIN |
(32) |
variant.h l.126 |
BQ4050_SDA_PIN |
(33) |
variant.h l.125 |
EXTERNAL_WATCHDOG_DONE_PIN |
9 |
platformio.ini l.17 |
EXTERNAL_WATCHDOG_WAKE_PIN |
10 |
platformio.ini l.18 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.27 |
PINS_COUNT |
(48) |
variant.h l.26 |
PIN_NEOPIXEL |
(47) |
variant.h l.71 |
PIN_SERIAL1_RX |
(37) |
variant.h l.34 |
PIN_SERIAL1_TX |
(39) |
variant.h l.35 |
PIN_SERIAL2_RX |
(-1) |
variant.h l.37 |
PIN_SERIAL2_TX |
(-1) |
variant.h l.38 |
PIN_WIRE1_SCL |
(5) |
variant.h l.48 |
PIN_WIRE1_SDA |
(30) |
variant.h l.47 |
heltec_t096¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
(0 + 5) |
variant.h l.90 |
P_LORA_BUSY |
19 |
platformio.ini l.16 |
P_LORA_DIO_1 |
21 |
platformio.ini l.13 |
P_LORA_KCT8103L_PA_CSD |
12 |
platformio.ini l.22 |
P_LORA_KCT8103L_PA_CTX |
41 |
platformio.ini l.23 |
P_LORA_MISO |
14 |
platformio.ini l.18 |
P_LORA_MOSI |
11 |
platformio.ini l.19 |
P_LORA_NSS |
5 |
platformio.ini l.14 |
P_LORA_PA_POWER |
30 |
platformio.ini l.21 |
P_LORA_RESET |
16 |
platformio.ini l.15 |
P_LORA_SCLK |
40 |
platformio.ini l.17 |
P_LORA_TX_LED |
28 |
platformio.ini l.20 |
SX126X_BUSY |
(0 + 19) |
variant.h l.92 |
SX126X_DIO1 |
(0 + 21) |
variant.h l.91 |
SX126X_RESET |
(0 + 16) |
variant.h l.93 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(0 + 8) |
variant.h l.54 |
PIN_WIRE_SDA |
(0 + 7) |
variant.h l.53 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(0) |
variant.h l.107 |
PIN_SPI1_MOSI |
(0+17) |
variant.h l.108 |
PIN_SPI1_SCK |
(0+20) |
variant.h l.109 |
PIN_SPI_MISO |
(0 + 14) |
variant.h l.102 |
PIN_SPI_MOSI |
(0 + 11) |
variant.h l.103 |
PIN_SPI_NSS |
LORA_CS |
variant.h l.105 |
PIN_SPI_SCK |
(32 + 8) |
variant.h l.104 |
Display
| Signal | Value | Source |
|---|---|---|
PIN_TFT_CS |
(0 + 22) |
variant.h l.131 |
PIN_TFT_DC |
(0 + 15) |
variant.h l.132 |
PIN_TFT_LEDA_CTL |
(32 + 12) |
variant.h l.129 |
PIN_TFT_LEDA_CTL_ACTIVE |
LOW |
variant.h l.130 |
PIN_TFT_RST |
(0 + 13) |
variant.h l.127 |
PIN_TFT_SCL |
(0 + 20) |
variant.h l.125 |
PIN_TFT_SDA |
(0 + 17) |
variant.h l.126 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
GPS_EN |
platformio.ini l.36 |
PIN_GPS_EN_ACTIVE |
LOW |
platformio.ini l.37 |
PIN_GPS_RESET |
GPS_RESET |
platformio.ini l.38 |
PIN_GPS_RESET_ACTIVE |
LOW |
platformio.ini l.39 |
PIN_GPS_RX |
25 |
platformio.ini l.34 |
PIN_GPS_TX |
23 |
platformio.ini l.35 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.79 |
LED_PIN |
LED_BUILTIN |
variant.h l.68 |
PIN_BUTTON1 |
(32 + 10) |
variant.h l.78 |
PIN_LED |
LED_BUILTIN |
variant.h l.65 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.84 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(3) |
variant.h l.25 |
PIN_BAT_CTL |
47 |
platformio.ini l.42 |
PIN_VBAT_READ |
BATTERY_PIN |
platformio.ini l.41 |
PIN_VEXT_EN |
26 |
platformio.ini l.32 |
PIN_VEXT_EN_ACTIVE |
HIGH |
platformio.ini l.33 |
Other
| Signal | Value | Source |
|---|---|---|
ENV_PIN_SCL |
PIN_WIRE1_SCL |
platformio.ini l.115 |
ENV_PIN_SDA |
PIN_WIRE1_SDA |
platformio.ini l.114 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.46 |
PINS_COUNT |
(48) |
variant.h l.45 |
PIN_3V3_EN |
(38) |
variant.h l.23 |
PIN_SERIAL1_RX |
(0 + 23) |
variant.h l.117 |
PIN_SERIAL1_TX |
(0 + 25) |
variant.h l.118 |
PIN_SERIAL2_RX |
(0 + 9) |
variant.h l.120 |
PIN_SERIAL2_TX |
(0 + 10) |
variant.h l.121 |
PIN_WIRE1_SCL |
(0 + 27) |
variant.h l.59 |
PIN_WIRE1_SDA |
(0 + 4) |
variant.h l.58 |
heltec_t1¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
SX126X_CS |
variant.h l.87 |
P_LORA_BUSY |
SX126X_BUSY |
variant.h l.99 |
P_LORA_DIO_1 |
SX126X_DIO1 |
variant.h l.96 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.117 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.118 |
P_LORA_NSS |
LORA_CS |
variant.h l.97 |
P_LORA_RESET |
SX126X_RESET |
variant.h l.98 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.116 |
P_LORA_TX_LED |
PIN_LED1 |
variant.h l.100 |
SX126X_BUSY |
(0 + 29) |
variant.h l.89 |
SX126X_CS |
(32 + 11) |
variant.h l.86 |
SX126X_DIO1 |
(0 + 31) |
variant.h l.88 |
SX126X_RESET |
(0 + 2) |
variant.h l.90 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(0 + 10) |
variant.h l.77 |
PIN_WIRE_SDA |
(32 + 3) |
variant.h l.76 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
ST7735_MISO |
variant.h l.112 |
PIN_SPI1_MOSI |
ST7735_SDA |
variant.h l.113 |
PIN_SPI1_SCK |
ST7735_SCK |
variant.h l.114 |
PIN_SPI_MISO |
(0 + 3) |
variant.h l.107 |
PIN_SPI_MOSI |
(32 + 14) |
variant.h l.108 |
PIN_SPI_NSS |
LORA_CS |
variant.h l.110 |
PIN_SPI_SCK |
(32 + 13) |
variant.h l.109 |
Display
| Signal | Value | Source |
|---|---|---|
PIN_TFT_CS |
ST7735_CS |
variant.h l.33 |
PIN_TFT_DC |
ST7735_RS |
variant.h l.34 |
PIN_TFT_LEDA_CTL |
ST7735_BL |
variant.h l.38 |
PIN_TFT_LEDA_CTL_ACTIVE |
LOW |
variant.h l.39 |
PIN_TFT_RST |
ST7735_RESET |
variant.h l.37 |
PIN_TFT_SCL |
ST7735_SCK |
variant.h l.36 |
PIN_TFT_SDA |
ST7735_SDA |
variant.h l.35 |
PIN_TFT_VDD_CTL |
VTFT_CTRL |
variant.h l.40 |
PIN_TFT_VDD_CTL_ACTIVE |
LOW |
variant.h l.41 |
GPS
| Signal | Value | Source |
|---|---|---|
GPS_RX_PIN |
(0 + 7) |
variant.h l.135 |
GPS_TX_PIN |
(0 + 8) |
variant.h l.134 |
PIN_GPS_EN |
(0 + 4) |
variant.h l.129 |
PIN_GPS_EN_ACTIVE |
LOW |
variant.h l.132 |
PIN_GPS_PPS |
(32 + 9) |
variant.h l.133 |
PIN_GPS_RESET |
(0 + 26) |
variant.h l.125 |
PIN_GPS_RESET_ACTIVE |
LOW |
variant.h l.128 |
PIN_GPS_RX |
GPS_RX_PIN |
variant.h l.137 |
PIN_GPS_TX |
GPS_TX_PIN |
variant.h l.136 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.61 |
LED_PIN |
LED_BUILTIN |
variant.h l.53 |
PIN_BUTTON1 |
(32 + 10) |
variant.h l.59 |
PIN_BUTTON2 |
(0 + 14) |
variant.h l.60 |
PIN_LED |
LED_BUILTIN |
variant.h l.49 |
PIN_LED1 |
(0 + 16) |
variant.h l.47 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.63 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(0 + 5) |
variant.h l.155 |
PIN_BAT_CTL |
ADC_CTRL |
variant.h l.153 |
PIN_VBAT_READ |
BATTERY_PIN |
variant.h l.156 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.16 |
PINS_COUNT |
(48) |
variant.h l.15 |
PIN_BUZZER |
(0 + 9) |
variant.h l.145 |
PIN_BUZZER_VOLTAGE_MULTIPLIER_1 |
(32 + 2) |
variant.h l.146 |
PIN_BUZZER_VOLTAGE_MULTIPLIER_2 |
(32 + 5) |
variant.h l.147 |
PIN_SENSOR_EN |
(32 + 6) |
variant.h l.79 |
PIN_SENSOR_EN_ACTIVE |
LOW |
variant.h l.80 |
PIN_SERIAL1_RX |
GPS_RX_PIN |
variant.h l.139 |
PIN_SERIAL1_TX |
GPS_TX_PIN |
variant.h l.140 |
heltec_t114¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
(24) |
variant.h l.109 |
P_LORA_BUSY |
17 |
platformio.ini l.19 |
P_LORA_DIO_1 |
20 |
platformio.ini l.16 |
P_LORA_MISO |
23 |
platformio.ini l.21 |
P_LORA_MOSI |
22 |
platformio.ini l.22 |
P_LORA_NSS |
24 |
platformio.ini l.17 |
P_LORA_RESET |
25 |
platformio.ini l.18 |
P_LORA_SCLK |
19 |
platformio.ini l.20 |
P_LORA_TX_LED |
35 |
platformio.ini l.23 |
SX126X_BUSY |
(17) |
variant.h l.111 |
SX126X_DIO1 |
(20) |
variant.h l.110 |
SX126X_POWER_EN |
37 |
platformio.ini l.27 |
SX126X_RESET |
(25) |
variant.h l.112 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(27) |
variant.h l.62 |
PIN_WIRE_SDA |
(26) |
variant.h l.61 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(43) |
variant.h l.116 |
PIN_SPI1_MOSI |
(41) |
variant.h l.117 |
PIN_SPI1_SCK |
(40) |
variant.h l.118 |
PIN_SPI_MISO |
(23) |
variant.h l.72 |
PIN_SPI_MOSI |
(22) |
variant.h l.73 |
PIN_SPI_NSS |
(24) |
variant.h l.75 |
PIN_SPI_SCK |
(19) |
variant.h l.74 |
Display
| Signal | Value | Source |
|---|---|---|
PIN_TFT_CS |
(11) |
variant.h l.141 |
PIN_TFT_DC |
(12) |
variant.h l.142 |
PIN_TFT_LEDA_CTL |
(15) |
variant.h l.140 |
PIN_TFT_RST |
(2) |
variant.h l.138 |
PIN_TFT_SCL |
(40) |
variant.h l.136 |
PIN_TFT_SDA |
(41) |
variant.h l.137 |
PIN_TFT_VDD_CTL |
(3) |
variant.h l.139 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
21 |
platformio.ini l.34 |
PIN_GPS_RESET |
38 |
platformio.ini l.35 |
PIN_GPS_RESET_ACTIVE |
LOW |
platformio.ini l.36 |
PIN_GPS_RX |
(39) |
variant.h l.131 |
PIN_GPS_TX |
(37) |
variant.h l.132 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.95 |
LED_PIN |
LED_BUILTIN |
variant.h l.84 |
PIN_BUTTON1 |
(42) |
variant.h l.94 |
PIN_LED |
LED_BUILTIN |
variant.h l.81 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.100 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(4) |
variant.h l.25 |
PIN_BAT_CTL |
6 |
T114Board.h l.9 |
PIN_VBAT_READ |
4 |
T114Board.h l.8 |
Other
| Signal | Value | Source |
|---|---|---|
ENV_PIN_SCL |
PIN_WIRE1_SCL |
platformio.ini l.38 |
ENV_PIN_SDA |
PIN_WIRE1_SDA |
platformio.ini l.37 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.45 |
PINS_COUNT |
(48) |
variant.h l.44 |
PIN_3V3_EN |
(38) |
variant.h l.23 |
PIN_NEOPIXEL |
(14) |
variant.h l.88 |
PIN_SERIAL1_RX |
(37) |
variant.h l.52 |
PIN_SERIAL1_TX |
(39) |
variant.h l.53 |
PIN_SERIAL2_RX |
(9) |
variant.h l.55 |
PIN_SERIAL2_TX |
(10) |
variant.h l.56 |
PIN_WIRE1_SCL |
(8) |
variant.h l.65 |
PIN_WIRE1_SDA |
(7) |
variant.h l.64 |
heltec_tower_v2¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
SX126X_CS |
variant.h l.40 |
LORA_KCT8103L_EN |
(0 + 15) |
variant.h l.56 |
LORA_KCT8103L_TX_RX |
(0 + 16) |
variant.h l.57 |
LORA_PA_POWER |
LORA_KCT8103L_EN |
variant.h l.58 |
P_LORA_BUSY |
SX126X_BUSY |
variant.h l.49 |
P_LORA_DIO_1 |
SX126X_DIO1 |
variant.h l.48 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.51 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.52 |
P_LORA_NSS |
LORA_CS |
variant.h l.47 |
P_LORA_RESET |
SX126X_RESET |
variant.h l.50 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.53 |
P_LORA_TX_LED |
LED_BUILTIN |
variant.h l.31 |
SX126X_BUSY |
(0 + 17) |
variant.h l.42 |
SX126X_CS |
(0 + 24) |
variant.h l.39 |
SX126X_DIO1 |
(0 + 20) |
variant.h l.41 |
SX126X_RESET |
(0 + 25) |
variant.h l.43 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
PIN_WIRE_SCL |
variant.h l.17 |
PIN_BOARD_SDA |
PIN_WIRE_SDA |
variant.h l.16 |
PIN_WIRE_SCL |
(0 + 5) |
variant.h l.15 |
PIN_WIRE_SDA |
(0 + 30) |
variant.h l.14 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(0 + 23) |
variant.h l.20 |
PIN_SPI_MOSI |
(0 + 22) |
variant.h l.21 |
PIN_SPI_NSS |
LORA_CS |
variant.h l.23 |
PIN_SPI_SCK |
(0 + 19) |
variant.h l.22 |
GPS
| Signal | Value | Source |
|---|---|---|
GPS_RX_PIN |
(32 + 5) |
variant.h l.76 |
GPS_TX_PIN |
(32 + 7) |
variant.h l.75 |
PIN_GPS_EN |
(0 + 7) |
variant.h l.66 |
PIN_GPS_EN_ACTIVE |
LOW |
variant.h l.67 |
PIN_GPS_PPS |
(32 + 4) |
variant.h l.70 |
PIN_GPS_RESET |
(32 + 6) |
variant.h l.64 |
PIN_GPS_RESET_ACTIVE |
GPS_RESET_MODE |
variant.h l.65 |
PIN_GPS_RX |
GPS_TX_PIN |
variant.h l.78 |
PIN_GPS_STANDBY |
(32 + 2) |
variant.h l.69 |
PIN_GPS_TX |
GPS_RX_PIN |
variant.h l.77 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.35 |
LED_PIN |
(-1) |
variant.h l.30 |
PIN_BUTTON1 |
(32 + 10) |
variant.h l.34 |
PIN_LED |
LED_BUILTIN |
variant.h l.26 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.36 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(0 + 4) |
variant.h l.95 |
PIN_BAT_CTL |
(0 + 21) |
variant.h l.92 |
PIN_VBAT_READ |
BATTERY_PIN |
variant.h l.96 |
Other
| Signal | Value | Source |
|---|---|---|
EXTERNAL_WATCHDOG_DONE_PIN |
(0 + 9) |
variant.h l.86 |
EXTERNAL_WATCHDOG_WAKE_PIN |
(0 + 10) |
variant.h l.87 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.9 |
PINS_COUNT |
(48) |
variant.h l.8 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.80 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.81 |
PIN_SERIAL2_RX |
(-1) |
variant.h l.82 |
PIN_SERIAL2_TX |
(-1) |
variant.h l.83 |
RF_PA_DETECT_PIN |
(0 + 13) |
variant.h l.59 |
ikoka_handheld_nrf¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
D3 |
platformio.ini l.18 |
P_LORA_DIO_1 |
D1 |
platformio.ini l.16 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.106 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.107 |
P_LORA_NSS |
D4 |
platformio.ini l.19 |
P_LORA_RESET |
D2 |
platformio.ini l.17 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.105 |
P_LORA_TX_LED |
11 |
platformio.ini l.15 |
SX126X_RXEN |
D5 |
platformio.ini l.20 |
SX126X_TXEN |
RADIOLIB_NC |
platformio.ini l.21 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(7) |
variant.h l.113 |
PIN_WIRE_SDA |
(6) |
variant.h l.112 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(25) |
variant.h l.100 |
PIN_SPI1_MOSI |
(26) |
variant.h l.101 |
PIN_SPI1_SCK |
(29) |
variant.h l.102 |
PIN_SPI_MISO |
(9) |
variant.h l.96 |
PIN_SPI_MOSI |
(10) |
variant.h l.97 |
PIN_SPI_SCK |
(8) |
variant.h l.98 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(PINS_COUNT) |
variant.h l.41 |
PIN_LED |
(LED_RED) |
variant.h l.27 |
PIN_USER_BTN |
D0 |
platformio.ini l.42 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT |
(32) |
variant.h l.68 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(33) |
variant.h l.22 |
PINS_COUNT |
(33) |
variant.h l.21 |
PIN_A0 |
(0) |
variant.h l.62 |
PIN_A1 |
(1) |
variant.h l.63 |
PIN_A2 |
(2) |
variant.h l.64 |
PIN_A3 |
(3) |
variant.h l.65 |
PIN_A4 |
(4) |
variant.h l.66 |
PIN_A5 |
(5) |
variant.h l.67 |
PIN_CHARGING_CURRENT |
(22) |
variant.h l.59 |
PIN_LSM6DS3TR_C_INT1 |
(18) |
variant.h l.121 |
PIN_LSM6DS3TR_C_POWER |
(15) |
variant.h l.120 |
PIN_NEOPIXEL |
(PINS_COUNT) |
variant.h l.29 |
PIN_NFC1 |
(30) |
variant.h l.86 |
PIN_NFC2 |
(31) |
variant.h l.87 |
PIN_PDM_CLK |
(20) |
variant.h l.125 |
PIN_PDM_DIN |
(21) |
variant.h l.126 |
PIN_PDM_PWR |
(19) |
variant.h l.124 |
PIN_QSPI_CS |
(25) |
variant.h l.130 |
PIN_QSPI_IO0 |
(26) |
variant.h l.131 |
PIN_QSPI_IO1 |
(27) |
variant.h l.132 |
PIN_QSPI_IO2 |
(28) |
variant.h l.133 |
PIN_QSPI_IO3 |
(29) |
variant.h l.134 |
PIN_QSPI_SCK |
(24) |
variant.h l.129 |
PIN_SERIAL1_RX |
(7) |
variant.h l.90 |
PIN_SERIAL1_TX |
(6) |
variant.h l.91 |
ikoka_nano_nrf¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
D2 |
platformio.ini l.18 |
P_LORA_DIO_1 |
D1 |
platformio.ini l.17 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.107 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.108 |
P_LORA_NSS |
D0 |
platformio.ini l.20 |
P_LORA_RESET |
D3 |
platformio.ini l.19 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.106 |
P_LORA_TX_LED |
11 |
platformio.ini l.12 |
SX126X_RXEN |
D7 |
platformio.ini l.21 |
SX126X_TXEN |
RADIOLIB_NC |
platformio.ini l.22 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
5 |
platformio.ini l.27 |
PIN_WIRE_SDA |
4 |
platformio.ini l.28 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(25) |
variant.h l.101 |
PIN_SPI1_MOSI |
(26) |
variant.h l.102 |
PIN_SPI1_SCK |
(29) |
variant.h l.103 |
PIN_SPI_MISO |
(9) |
variant.h l.97 |
PIN_SPI_MOSI |
(10) |
variant.h l.98 |
PIN_SPI_SCK |
(8) |
variant.h l.99 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_LED |
(LED_RED) |
variant.h l.27 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT |
(32) |
variant.h l.69 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(33) |
variant.h l.22 |
PINS_COUNT |
(33) |
variant.h l.21 |
PIN_A0 |
(0) |
variant.h l.63 |
PIN_A1 |
(1) |
variant.h l.64 |
PIN_A2 |
(2) |
variant.h l.65 |
PIN_A3 |
(3) |
variant.h l.66 |
PIN_A4 |
(4) |
variant.h l.67 |
PIN_A5 |
(5) |
variant.h l.68 |
PIN_CHARGING_CURRENT |
(22) |
variant.h l.59 |
PIN_LSM6DS3TR_C_INT1 |
(18) |
variant.h l.122 |
PIN_LSM6DS3TR_C_POWER |
(15) |
variant.h l.121 |
PIN_NEOPIXEL |
(PINS_COUNT) |
variant.h l.29 |
PIN_NFC1 |
(30) |
variant.h l.87 |
PIN_NFC2 |
(31) |
variant.h l.88 |
PIN_PDM_CLK |
(20) |
variant.h l.126 |
PIN_PDM_DIN |
(21) |
variant.h l.127 |
PIN_PDM_PWR |
(19) |
variant.h l.125 |
PIN_QSPI_CS |
(25) |
variant.h l.131 |
PIN_QSPI_IO0 |
(26) |
variant.h l.132 |
PIN_QSPI_IO1 |
(27) |
variant.h l.133 |
PIN_QSPI_IO2 |
(28) |
variant.h l.134 |
PIN_QSPI_IO3 |
(29) |
variant.h l.135 |
PIN_QSPI_SCK |
(24) |
variant.h l.130 |
PIN_SERIAL1_RX |
(7) |
variant.h l.91 |
PIN_SERIAL1_TX |
(6) |
variant.h l.92 |
ikoka_stick_nrf¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
D3 |
platformio.ini l.20 |
P_LORA_DIO_1 |
D1 |
platformio.ini l.18 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.107 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.108 |
P_LORA_NSS |
D4 |
platformio.ini l.21 |
P_LORA_RESET |
D2 |
platformio.ini l.19 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.106 |
P_LORA_TX_LED |
11 |
platformio.ini l.12 |
SX126X_RXEN |
D5 |
platformio.ini l.22 |
SX126X_TXEN |
RADIOLIB_NC |
platformio.ini l.23 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
7 |
platformio.ini l.29 |
PIN_WIRE_SDA |
6 |
platformio.ini l.30 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(25) |
variant.h l.101 |
PIN_SPI1_MOSI |
(26) |
variant.h l.102 |
PIN_SPI1_SCK |
(29) |
variant.h l.103 |
PIN_SPI_MISO |
(9) |
variant.h l.97 |
PIN_SPI_MOSI |
(10) |
variant.h l.98 |
PIN_SPI_SCK |
(8) |
variant.h l.99 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(PINS_COUNT) |
variant.h l.41 |
PIN_LED |
(LED_RED) |
variant.h l.27 |
PIN_USER_BTN |
0 |
platformio.ini l.28 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT |
(32) |
variant.h l.69 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(33) |
variant.h l.22 |
PINS_COUNT |
(33) |
variant.h l.21 |
PIN_A0 |
(0) |
variant.h l.63 |
PIN_A1 |
(1) |
variant.h l.64 |
PIN_A2 |
(2) |
variant.h l.65 |
PIN_A3 |
(3) |
variant.h l.66 |
PIN_A4 |
(4) |
variant.h l.67 |
PIN_A5 |
(5) |
variant.h l.68 |
PIN_CHARGING_CURRENT |
(22) |
variant.h l.59 |
PIN_LSM6DS3TR_C_INT1 |
(18) |
variant.h l.122 |
PIN_LSM6DS3TR_C_POWER |
(15) |
variant.h l.121 |
PIN_NEOPIXEL |
(PINS_COUNT) |
variant.h l.29 |
PIN_NFC1 |
(30) |
variant.h l.87 |
PIN_NFC2 |
(31) |
variant.h l.88 |
PIN_PDM_CLK |
(20) |
variant.h l.126 |
PIN_PDM_DIN |
(21) |
variant.h l.127 |
PIN_PDM_PWR |
(19) |
variant.h l.125 |
PIN_QSPI_CS |
(25) |
variant.h l.131 |
PIN_QSPI_IO0 |
(26) |
variant.h l.132 |
PIN_QSPI_IO1 |
(27) |
variant.h l.133 |
PIN_QSPI_IO2 |
(28) |
variant.h l.134 |
PIN_QSPI_IO3 |
(29) |
variant.h l.135 |
PIN_QSPI_SCK |
(24) |
variant.h l.130 |
PIN_SERIAL1_RX |
(7) |
variant.h l.91 |
PIN_SERIAL1_TX |
(6) |
variant.h l.92 |
keepteen_lt1¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(29) |
variant.h l.49 |
P_LORA_DIO_1 |
(10) |
variant.h l.54 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.50 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.51 |
P_LORA_NSS |
(45) |
variant.h l.52 |
P_LORA_RESET |
(9) |
variant.h l.55 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.53 |
P_LORA_TX_LED |
PIN_LED |
variant.h l.24 |
SX126X_RXEN |
RADIOLIB_NC |
variant.h l.56 |
SX126X_TXEN |
RADIOLIB_NC |
variant.h l.57 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
36 |
platformio.ini l.14 |
PIN_BOARD_SDA |
34 |
platformio.ini l.13 |
PIN_WIRE_SCL |
(36) |
variant.h l.65 |
PIN_WIRE_SDA |
(34) |
variant.h l.64 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(2) |
variant.h l.44 |
PIN_SPI_MOSI |
(38) |
variant.h l.45 |
PIN_SPI_SCK |
(43) |
variant.h l.46 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(24) |
variant.h l.72 |
PIN_GPS_RX |
PIN_SERIAL1_TX |
variant.h l.71 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
variant.h l.70 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(32) |
variant.h l.28 |
PIN_LED |
(15) |
variant.h l.20 |
PIN_LED2 |
(13) |
variant.h l.21 |
PIN_USER_BTN |
PIN_BUTTON1 |
variant.h l.29 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(31) |
variant.h l.32 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.15 |
PINS_COUNT |
(48) |
variant.h l.14 |
PIN_SERIAL1_RX |
(22) |
variant.h l.38 |
PIN_SERIAL1_TX |
(20) |
variant.h l.39 |
lilygo_t_impulse_plus¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
SX1262_BUSY |
variant.h l.77 |
P_LORA_DIO_0 |
RADIOLIB_NC |
variant.h l.78 |
P_LORA_DIO_1 |
SX1262_DIO1 |
variant.h l.75 |
P_LORA_DIO_2 |
SX1262_DIO2 |
variant.h l.79 |
P_LORA_MISO |
SX1262_MISO |
variant.h l.81 |
P_LORA_MOSI |
SX1262_MOSI |
variant.h l.82 |
P_LORA_NSS |
SX1262_CS |
variant.h l.74 |
P_LORA_RESET |
SX1262_RST |
variant.h l.76 |
P_LORA_SCLK |
SX1262_SCLK |
variant.h l.80 |
SX126X_RXEN |
SX1262_RF_VC2 |
variant.h l.72 |
SX126X_TXEN |
SX1262_RF_VC1 |
variant.h l.71 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(27) |
variant.h l.190 |
PIN_WIRE_SDA |
(26) |
variant.h l.189 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(46) |
variant.h l.175 |
PIN_SPI_MOSI |
(45) |
variant.h l.176 |
PIN_SPI_SCK |
(47) |
variant.h l.177 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
GPS_EN |
variant.h l.93 |
PIN_GPS_EN_ACTIVE |
LOW |
variant.h l.95 |
PIN_GPS_RX |
GPS_UART_RX |
variant.h l.91 |
PIN_GPS_TX |
GPS_UART_TX |
variant.h l.92 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
_PINNUM(0, 24) |
variant.h l.124 |
PIN_LED1 |
(_PINNUM(0, 17)) |
variant.h l.108 |
PIN_USER_BTN |
-1 |
platformio.ini l.14 |
Other
| Signal | Value | Source |
|---|---|---|
ENV_PIN_SCL |
IIC_SCL_2 |
platformio.ini l.20 |
ENV_PIN_SDA |
IIC_SDA_2 |
platformio.ini l.19 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.103 |
PINS_COUNT |
(48) |
variant.h l.102 |
PIN_A0 |
(3) |
variant.h l.132 |
PIN_A1 |
(4) |
variant.h l.133 |
PIN_A2 |
(28) |
variant.h l.134 |
PIN_A3 |
(29) |
variant.h l.135 |
PIN_A4 |
(30) |
variant.h l.136 |
PIN_A5 |
(31) |
variant.h l.137 |
PIN_A6 |
(0xff) |
variant.h l.138 |
PIN_A7 |
(0xff) |
variant.h l.139 |
PIN_AREF |
(2) |
variant.h l.152 |
PIN_NFC1 |
(9) |
variant.h l.153 |
PIN_NFC2 |
(10) |
variant.h l.154 |
PIN_QSPI_CS |
ZD25WQ32C_CS |
variant.h l.206 |
PIN_QSPI_IO0 |
ZD25WQ32C_IO0 |
variant.h l.207 |
PIN_QSPI_IO1 |
ZD25WQ32C_IO1 |
variant.h l.208 |
PIN_QSPI_IO2 |
ZD25WQ32C_IO2 |
variant.h l.209 |
PIN_QSPI_IO3 |
ZD25WQ32C_IO3 |
variant.h l.210 |
PIN_QSPI_SCK |
ZD25WQ32C_SCLK |
variant.h l.205 |
PIN_SERIAL1_RX |
(33) |
variant.h l.163 |
PIN_SERIAL1_TX |
(34) |
variant.h l.164 |
PIN_SERIAL2_RX |
(8) |
variant.h l.167 |
PIN_SERIAL2_TX |
(6) |
variant.h l.168 |
PIN_WIRE1_SCL |
(27) |
variant.h l.193 |
PIN_WIRE1_SDA |
(26) |
variant.h l.192 |
lilygo_techo¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
(24) |
variant.h l.103 |
P_LORA_BUSY |
17 |
platformio.ini l.17 |
P_LORA_DIO_1 |
20 |
platformio.ini l.14 |
P_LORA_MISO |
23 |
platformio.ini l.19 |
P_LORA_MOSI |
22 |
platformio.ini l.20 |
P_LORA_NSS |
24 |
platformio.ini l.15 |
P_LORA_RESET |
25 |
platformio.ini l.16 |
P_LORA_SCLK |
19 |
platformio.ini l.18 |
P_LORA_TX_LED |
LED_GREEN |
platformio.ini l.26 |
SX126X_BUSY |
(17) |
variant.h l.105 |
SX126X_DIO1 |
(20) |
variant.h l.104 |
SX126X_POWER_EN |
37 |
platformio.ini l.21 |
SX126X_RESET |
(25) |
variant.h l.106 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(27) |
variant.h l.49 |
PIN_WIRE_SDA |
(26) |
variant.h l.48 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(38) |
variant.h l.113 |
PIN_SPI1_MOSI |
(29) |
variant.h l.114 |
PIN_SPI1_SCK |
(31) |
variant.h l.115 |
PIN_SPI_MISO |
(23) |
variant.h l.56 |
PIN_SPI_MOSI |
(22) |
variant.h l.57 |
PIN_SPI_NSS |
(24) |
variant.h l.59 |
PIN_SPI_SCK |
(19) |
variant.h l.58 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
GPS_EN |
platformio.ini l.31 |
PIN_GPS_PPS |
(36) |
variant.h l.141 |
PIN_GPS_RESET |
(37) |
variant.h l.140 |
PIN_GPS_RESET_ACTIVE |
LOW |
platformio.ini l.32 |
PIN_GPS_RX |
(40) |
variant.h l.137 |
PIN_GPS_TX |
(41) |
variant.h l.138 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.90 |
LED_PIN |
LED_BUILTIN |
variant.h l.83 |
PIN_BUTTON1 |
(42) |
variant.h l.89 |
PIN_BUTTON2 |
(11) |
variant.h l.93 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.91 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(4) |
variant.h l.24 |
PIN_VBAT_READ |
(4) |
TechoBoard.h l.13 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.36 |
PINS_COUNT |
(48) |
variant.h l.35 |
PIN_PWR_EN |
(12) |
variant.h l.22 |
PIN_QSPI_CS |
(47) |
variant.h l.65 |
PIN_QSPI_IO0 |
(44) |
variant.h l.66 |
PIN_QSPI_IO1 |
(45) |
variant.h l.67 |
PIN_QSPI_IO2 |
(7) |
variant.h l.68 |
PIN_QSPI_IO3 |
(5) |
variant.h l.69 |
PIN_QSPI_SCK |
(46) |
variant.h l.64 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.43 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.44 |
PIN_TXCO |
(21) |
variant.h l.18 |
lilygo_techo_card¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(14) |
variant.h l.106 |
P_LORA_DIO_1 |
(40) |
variant.h l.104 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.102 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.103 |
P_LORA_NSS |
(11) |
variant.h l.107 |
P_LORA_RESET |
(7) |
variant.h l.105 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.101 |
SX126X_RXEN |
(33) |
variant.h l.108 |
SX126X_TXEN |
(27) |
variant.h l.109 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(34) |
variant.h l.48 |
PIN_WIRE_SDA |
(36) |
variant.h l.47 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(17) |
variant.h l.57 |
PIN_SPI_MOSI |
(15) |
variant.h l.58 |
PIN_SPI_SCK |
(13) |
variant.h l.59 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(25) |
variant.h l.122 |
PIN_GPS_PPS |
(23) |
variant.h l.125 |
PIN_GPS_RESET |
(47) |
variant.h l.123 |
PIN_GPS_RX |
(21) |
variant.h l.120 |
PIN_GPS_STANDBY |
(29) |
variant.h l.124 |
PIN_GPS_TX |
(19) |
variant.h l.121 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.91 |
LED_PIN |
LED_BUILTIN |
variant.h l.84 |
PIN_BUTTON1 |
(42) |
variant.h l.90 |
PIN_BUTTON2 |
(24) |
variant.h l.94 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.92 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_BAT_CTL |
(31) |
variant.h l.23 |
PIN_VBAT_READ |
(2) |
TechoCardBoard.h l.14 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.35 |
PINS_COUNT |
(48) |
variant.h l.34 |
PIN_BUZZER |
38 |
platformio.ini l.73 |
PIN_OLED_RESET |
-1 |
platformio.ini l.21 |
PIN_PWR_EN |
(30) |
variant.h l.21 |
PIN_QSPI_CS |
(12) |
variant.h l.65 |
PIN_QSPI_IO0 |
(6) |
variant.h l.66 |
PIN_QSPI_IO1 |
(8) |
variant.h l.67 |
PIN_QSPI_IO2 |
(41) |
variant.h l.68 |
PIN_QSPI_IO3 |
(26) |
variant.h l.69 |
PIN_QSPI_SCK |
(4) |
variant.h l.64 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.42 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.43 |
lilygo_techo_lite¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
_PINNUM(0, 11) |
variant.h l.105 |
P_LORA_BUSY |
SX126X_BUSY |
variant.h l.118 |
P_LORA_DIO_1 |
SX126X_DIO1 |
variant.h l.114 |
P_LORA_DIO_2 |
SX126X_DIO2 |
variant.h l.115 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.120 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.121 |
P_LORA_NSS |
LORA_CS |
variant.h l.116 |
P_LORA_RESET |
SX126X_RESET |
variant.h l.117 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.119 |
P_LORA_TX_LED |
LED_GREEN |
platformio.ini l.18 |
SX126X_BUSY |
_PINNUM(0, 14) |
variant.h l.109 |
SX126X_DIO1 |
_PINNUM(1, 8) |
variant.h l.107 |
SX126X_DIO2 |
_PINNUM(0, 5) |
variant.h l.108 |
SX126X_POWER_EN |
_PINNUM(0, 30) |
variant.h l.106 |
SX126X_RESET |
_PINNUM(0, 7) |
variant.h l.110 |
SX126X_RXEN |
_PINNUM(1, 1) |
variant.h l.111 |
SX126X_TXEN |
_PINNUM(0, 27) |
variant.h l.112 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
_PINNUM(1, 2) |
variant.h l.51 |
PIN_WIRE_SDA |
_PINNUM(1, 4) |
variant.h l.50 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(0) |
variant.h l.126 |
PIN_SPI1_MOSI |
_PINNUM(0, 20) |
variant.h l.127 |
PIN_SPI1_SCK |
_PINNUM(0, 19) |
variant.h l.128 |
PIN_SPI_MISO |
_PINNUM(0, 17) |
variant.h l.58 |
PIN_SPI_MOSI |
_PINNUM(0, 15) |
variant.h l.59 |
PIN_SPI_NSS |
(0) |
variant.h l.61 |
PIN_SPI_SCK |
_PINNUM(0, 13) |
variant.h l.60 |
Display
| Signal | Value | Source |
|---|---|---|
PIN_DISPLAY_BUSY |
DISP_BUSY |
variant.h l.151 |
PIN_DISPLAY_CS |
DISP_CS |
variant.h l.148 |
PIN_DISPLAY_DC |
DISP_DC |
variant.h l.149 |
PIN_DISPLAY_RST |
DISP_RST |
variant.h l.150 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
GPS_EN |
platformio.ini l.22 |
PIN_GPS_PPS |
_PINNUM(1, 15) |
variant.h l.161 |
PIN_GPS_RX |
_PINNUM(1, 10) |
variant.h l.158 |
PIN_GPS_STANDBY |
_PINNUM(1, 13) |
variant.h l.160 |
PIN_GPS_TX |
_PINNUM(0, 29) |
variant.h l.157 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.92 |
LED_PIN |
LED_BUILTIN |
variant.h l.85 |
PIN_BUTTON1 |
_PINNUM(0, 24) |
variant.h l.91 |
PIN_BUTTON2 |
_PINNUM(0, 18) |
variant.h l.95 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.93 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
_PINNUM(0, 2) |
variant.h l.26 |
PIN_VBAT_MEAS_EN |
_PINNUM(0, 31) |
TechoBoard.h l.12 |
PIN_VBAT_READ |
_PINNUM(0, 2) |
TechoBoard.h l.11 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.38 |
PINS_COUNT |
(48) |
variant.h l.37 |
PIN_PWR_EN |
_PINNUM(0, 30) |
variant.h l.24 |
PIN_QSPI_CS |
_PINNUM(0, 12) |
variant.h l.67 |
PIN_QSPI_IO0 |
_PINNUM(0, 6) |
variant.h l.68 |
PIN_QSPI_IO1 |
_PINNUM(0, 8) |
variant.h l.69 |
PIN_QSPI_IO2 |
_PINNUM(1, 9) |
variant.h l.70 |
PIN_QSPI_IO3 |
_PINNUM(0, 26) |
variant.h l.71 |
PIN_QSPI_SCK |
_PINNUM(0, 4) |
variant.h l.66 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.45 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.46 |
mesh_pocket¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
SX126X_CS |
variant.h l.93 |
P_LORA_BUSY |
SX126X_BUSY |
variant.h l.97 |
P_LORA_DIO_1 |
SX126X_DIO1 |
variant.h l.94 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.99 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.100 |
P_LORA_NSS |
SX126X_CS |
variant.h l.95 |
P_LORA_RESET |
SX126X_RESET |
variant.h l.96 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.98 |
SX126X_BUSY |
(0 + 15) |
variant.h l.84 |
SX126X_CS |
(0 + 26) |
variant.h l.82 |
SX126X_DIO1 |
(0 + 16) |
variant.h l.83 |
SX126X_RESET |
(0 + 12) |
variant.h l.85 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(32+13) |
variant.h l.51 |
PIN_WIRE_SDA |
(32+15) |
variant.h l.50 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(0) |
variant.h l.111 |
PIN_SPI1_MOSI |
(20) |
variant.h l.112 |
PIN_SPI1_SCK |
(22) |
variant.h l.113 |
PIN_SPI_MISO |
(32 + 9) |
variant.h l.89 |
PIN_SPI_MOSI |
(0 + 5) |
variant.h l.90 |
PIN_SPI_SCK |
(0 + 4) |
variant.h l.91 |
Display
| Signal | Value | Source |
|---|---|---|
PIN_DISPLAY_BUSY |
(32 + 6) |
variant.h l.107 |
PIN_DISPLAY_CS |
(24) |
variant.h l.106 |
PIN_DISPLAY_DC |
(31) |
variant.h l.108 |
PIN_DISPLAY_RST |
(32 + 4) |
variant.h l.109 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.68 |
PIN_BUTTON1 |
(32 + 10) |
variant.h l.67 |
PIN_LED |
LED_BUILTIN |
variant.h l.57 |
PIN_STATUS_LED |
LED_BUILTIN |
variant.h l.60 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.73 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(0 + 29) |
variant.h l.20 |
PIN_BAT_CTL |
34 |
MeshPocket.h l.9 |
PIN_BAT_CTRL |
(32 + 2) |
variant.h l.21 |
PIN_VBAT_READ |
29 |
MeshPocket.h l.8 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.33 |
PINS_COUNT |
(48) |
variant.h l.32 |
PIN_SERIAL1_RX |
(37) |
variant.h l.40 |
PIN_SERIAL1_TX |
(39) |
variant.h l.41 |
PIN_SERIAL2_RX |
(7) |
variant.h l.43 |
PIN_SERIAL2_TX |
(8) |
variant.h l.44 |
meshtiny¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.78 |
P_LORA_DIO_1 |
(47) |
variant.h l.76 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.74 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.75 |
P_LORA_NSS |
(42) |
variant.h l.79 |
P_LORA_RESET |
(38) |
variant.h l.77 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.73 |
P_LORA_TX_LED |
PIN_LED2 |
variant.h l.28 |
SX126X_POWER_EN |
(37) |
variant.h l.80 |
SX126X_RXEN |
RADIOLIB_NC |
variant.h l.82 |
SX126X_TXEN |
RADIOLIB_NC |
variant.h l.83 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
(14) |
variant.h l.93 |
PIN_BOARD_SDA |
(13) |
variant.h l.92 |
PIN_WIRE_SCL |
(14) |
variant.h l.91 |
PIN_WIRE_SDA |
(13) |
variant.h l.90 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(29) |
variant.h l.68 |
PIN_SPI1_MOSI |
(30) |
variant.h l.69 |
PIN_SPI1_SCK |
(3) |
variant.h l.70 |
PIN_SPI_MISO |
(45) |
variant.h l.64 |
PIN_SPI_MOSI |
(44) |
variant.h l.65 |
PIN_SPI_SCK |
(43) |
variant.h l.66 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
LED_PIN |
LED_BUILTIN |
variant.h l.32 |
PIN_BUTTON1 |
(9) |
variant.h l.36 |
PIN_BUTTON2 |
(4) |
variant.h l.37 |
PIN_BUTTON3 |
(26) |
variant.h l.38 |
PIN_BUTTON4 |
(28) |
variant.h l.39 |
PIN_LED |
LED_BUILTIN |
variant.h l.31 |
PIN_LED1 |
(35) |
variant.h l.21 |
PIN_LED2 |
(36) |
variant.h l.22 |
PIN_USER_BTN |
PIN_SIDE_BUTTON |
variant.h l.44 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(5) |
variant.h l.47 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.16 |
PINS_COUNT |
(48) |
variant.h l.15 |
PIN_3V3_EN |
(34) |
variant.h l.96 |
PIN_BUZZER |
30 |
platformio.ini l.34 |
PIN_SERIAL1_RX |
(15) |
variant.h l.56 |
PIN_SERIAL1_TX |
(16) |
variant.h l.57 |
PIN_SERIAL2_RX |
(8) |
variant.h l.58 |
PIN_SERIAL2_TX |
(6) |
variant.h l.59 |
PIN_SIDE_BUTTON |
PIN_BUTTON1 |
variant.h l.40 |
meshtracker_x1¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_BUSY |
(7) |
variant.h l.97 |
LORA_DIO_1 |
(33) |
variant.h l.94 |
LORA_MISO |
(PIN_SPI_MISO) |
variant.h l.99 |
LORA_MOSI |
(PIN_SPI_MOSI) |
variant.h l.100 |
LORA_NSS |
(PIN_SPI_NSS) |
variant.h l.95 |
LORA_RESET |
(42) |
variant.h l.96 |
LORA_SCLK |
(PIN_SPI_SCK) |
variant.h l.98 |
P_LORA_BUSY |
7 |
platformio.ini l.22 |
P_LORA_DIO_1 |
33 |
platformio.ini l.25 |
P_LORA_MISO |
40 |
platformio.ini l.26 |
P_LORA_MOSI |
41 |
platformio.ini l.27 |
P_LORA_NSS |
12 |
platformio.ini l.24 |
P_LORA_RESET |
42 |
platformio.ini l.28 |
P_LORA_SCLK |
11 |
platformio.ini l.23 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(46) |
variant.h l.61 |
PIN_WIRE_SDA |
(47) |
variant.h l.60 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(40) |
variant.h l.69 |
PIN_SPI_MOSI |
(41) |
variant.h l.70 |
PIN_SPI_NSS |
(12) |
variant.h l.72 |
PIN_SPI_SCK |
(11) |
variant.h l.71 |
GPS
| Signal | Value | Source |
|---|---|---|
GPS_RX_PIN |
PIN_SERIAL1_RX |
variant.h l.106 |
GPS_TX_PIN |
PIN_SERIAL1_TX |
variant.h l.107 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.89 |
LED_PIN |
LED_GREEN |
variant.h l.81 |
PIN_BUTTON1 |
(6) |
variant.h l.88 |
PIN_STATUS_LED |
24 |
platformio.ini l.14 |
PIN_STATUS_LED_B |
28 |
platformio.ini l.17 |
PIN_STATUS_LED_G |
24 |
platformio.ini l.16 |
PIN_STATUS_LED_R |
3 |
platformio.ini l.15 |
PIN_USER_BTN |
6 |
platformio.ini l.12 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(2) |
variant.h l.23 |
PIN_BAT_ADC_EN |
(38) |
variant.h l.20 |
Other
| Signal | Value | Source |
|---|---|---|
BUZZER_PIN |
(25) |
variant.h l.125 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.41 |
PINS_COUNT |
(48) |
variant.h l.40 |
PIN_3V3_EN |
(39) |
variant.h l.19 |
PIN_BUZZER |
25 |
platformio.ini l.85 |
PIN_DRV_EN |
(37) |
variant.h l.120 |
PIN_FLASH_EN |
(15) |
variant.h l.130 |
PIN_QSPI_CS |
(20) |
variant.h l.133 |
PIN_QSPI_IO0 |
(21) |
variant.h l.134 |
PIN_QSPI_IO1 |
(22) |
variant.h l.135 |
PIN_QSPI_IO2 |
(23) |
variant.h l.136 |
PIN_QSPI_IO3 |
(32) |
variant.h l.137 |
PIN_QSPI_SCK |
(19) |
variant.h l.132 |
PIN_RTC_EN |
(9) |
variant.h l.21 |
PIN_SERIAL1_RX |
(14) |
variant.h l.48 |
PIN_SERIAL1_TX |
(13) |
variant.h l.49 |
PIN_SERIAL2_RX |
(17) |
variant.h l.51 |
PIN_SERIAL2_TX |
(16) |
variant.h l.52 |
minewsemi_me25ls01¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_BUSY |
(32 + 10) |
variant.h l.66 |
LORA_CS |
PIN_SPI_NSS |
variant.h l.70 |
LORA_DIO_1 |
(32 + 12) |
variant.h l.62 |
LORA_DIO_2 |
(32 + 10) |
variant.h l.63 |
LORA_MISO |
(PIN_SPI_MISO) |
variant.h l.68 |
LORA_MOSI |
(PIN_SPI_MOSI) |
variant.h l.69 |
LORA_NSS |
(PIN_SPI_NSS) |
variant.h l.64 |
LORA_RESET |
(32 + 11) |
variant.h l.65 |
LORA_SCLK |
(PIN_SPI_SCK) |
variant.h l.67 |
P_LORA_BUSY |
(32 + 10) |
MinewsemiME25LS01Board.h l.12 |
P_LORA_DIO_1 |
(32 + 12) |
MinewsemiME25LS01Board.h l.9 |
P_LORA_MISO |
(0 + 29) |
MinewsemiME25LS01Board.h l.14 |
P_LORA_MOSI |
(0 + 2) |
MinewsemiME25LS01Board.h l.15 |
P_LORA_NSS |
(32 + 13) |
MinewsemiME25LS01Board.h l.10 |
P_LORA_RESET |
(32 + 11) |
MinewsemiME25LS01Board.h l.11 |
P_LORA_SCLK |
(32 + 15) |
MinewsemiME25LS01Board.h l.13 |
P_LORA_TX_LED |
LED_RED |
variant.h l.52 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(16) |
variant.h l.36 |
PIN_WIRE_SDA |
(21) |
variant.h l.35 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(0 + 29) |
variant.h l.42 |
PIN_SPI_MOSI |
(0 + 2) |
variant.h l.43 |
PIN_SPI_NSS |
(32 + 13) |
variant.h l.45 |
PIN_SPI_SCK |
(32 + 15) |
variant.h l.44 |
GPS
| Signal | Value | Source |
|---|---|---|
GPS_RX_PIN |
PIN_SERIAL1_RX |
variant.h l.85 |
GPS_TX_PIN |
PIN_SERIAL1_TX |
variant.h l.86 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.59 |
LED_PIN |
LED_BLUE |
variant.h l.51 |
PIN_BUTTON1 |
(0 + 27) |
variant.h l.58 |
PIN_STATUS_LED |
39 |
platformio.ini l.12 |
PIN_USER_BTN |
27 |
platformio.ini l.11 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(31) |
variant.h l.11 |
PIN_VBAT_READ |
BATTERY_PIN |
MinewsemiME25LS01Board.h l.20 |
Other
| Signal | Value | Source |
|---|---|---|
LR1110_BUSY_PIN |
LORA_DIO_2 |
variant.h l.77 |
LR1110_IRQ_PIN |
LORA_DIO_1 |
variant.h l.75 |
LR1110_NRESET_PIN |
LORA_RESET |
variant.h l.76 |
LR1110_SPI_MISO_PIN |
LORA_MISO |
variant.h l.81 |
LR1110_SPI_MOSI_PIN |
LORA_MOSI |
variant.h l.80 |
LR1110_SPI_NSS_PIN |
LORA_CS |
variant.h l.78 |
LR1110_SPI_SCK_PIN |
LORA_SCLK |
variant.h l.79 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.20 |
PINS_COUNT |
(48) |
variant.h l.19 |
PIN_SERIAL1_RX |
(14) |
variant.h l.25 |
PIN_SERIAL1_TX |
(13) |
variant.h l.26 |
PIN_SERIAL2_RX |
(15) |
variant.h l.28 |
PIN_SERIAL2_TX |
(17) |
variant.h l.29 |
muziworks_r1_neo¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.58 |
P_LORA_DIO_1 |
(47) |
variant.h l.55 |
P_LORA_MISO |
(45) |
variant.h l.60 |
P_LORA_MOSI |
(44) |
variant.h l.61 |
P_LORA_NSS |
(42) |
variant.h l.56 |
P_LORA_RESET |
RADIOLIB_NC |
variant.h l.57 |
P_LORA_SCLK |
(43) |
variant.h l.59 |
P_LORA_TX_LED |
LED_GREEN |
variant.h l.88 |
SX126X_POWER_EN |
(37) |
variant.h l.62 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(RTC_SCL) |
variant.h l.144 |
PIN_WIRE_SDA |
(RTC_SDA) |
variant.h l.143 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(10) |
variant.h l.137 |
PIN_SPI_MOSI |
(9) |
variant.h l.136 |
PIN_SPI_SCK |
(21) |
variant.h l.138 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_1PPS |
GPS_PPS |
variant.h l.74 |
PIN_GPS_EN |
(GPS_EN) |
variant.h l.128 |
PIN_GPS_RX |
(GPS_RX) |
variant.h l.127 |
PIN_GPS_TX |
(GPS_TX) |
variant.h l.126 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_USER_BTN |
(26) |
variant.h l.94 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_BAT_CHG |
(34) |
variant.h l.162 |
PIN_VBAT_READ |
(31) |
variant.h l.161 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.43 |
PINS_COUNT |
(48) |
variant.h l.42 |
PIN_A0 |
(0xFF) |
variant.h l.101 |
PIN_A1 |
(0xFF) |
variant.h l.102 |
PIN_A2 |
(4) |
variant.h l.103 |
PIN_A3 |
(5) |
variant.h l.104 |
PIN_A4 |
(0xFF) |
variant.h l.105 |
PIN_A5 |
(0xFF) |
variant.h l.106 |
PIN_A6 |
(0xFF) |
variant.h l.107 |
PIN_A7 |
(31) |
variant.h l.108 |
PIN_AREF |
(0xFF) |
variant.h l.121 |
PIN_BUZZER |
(3) |
variant.h l.97 |
PIN_DCDC_EN_MCU_HOLD |
(13) |
variant.h l.48 |
PIN_MCU_SIGNAL |
(30) |
variant.h l.50 |
PIN_QSPI_CS |
(26) |
variant.h l.149 |
PIN_QSPI_IO0 |
(30) |
variant.h l.150 |
PIN_QSPI_IO1 |
(29) |
variant.h l.151 |
PIN_QSPI_IO2 |
(28) |
variant.h l.152 |
PIN_QSPI_IO3 |
(2) |
variant.h l.153 |
PIN_QSPI_SCK |
(3) |
variant.h l.148 |
PIN_SERIAL1_RX |
(PIN_GPS_RX) |
variant.h l.131 |
PIN_SERIAL1_TX |
(PIN_GPS_TX) |
variant.h l.130 |
PIN_SOFT_SHUTDOWN |
(29) |
variant.h l.49 |
nano_g2_ultra¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(32 + 11) |
nano-g2.h l.13 |
P_LORA_DIO_1 |
(32 + 10) |
nano-g2.h l.10 |
P_LORA_MISO |
(32 + 9) |
nano-g2.h l.15 |
P_LORA_MOSI |
(0 + 11) |
nano-g2.h l.16 |
P_LORA_NSS |
(32 + 13) |
nano-g2.h l.11 |
P_LORA_RESET |
(32 + 15) |
nano-g2.h l.12 |
P_LORA_SCLK |
(0 + 12) |
nano-g2.h l.14 |
SX126X_BUSY |
(32 + 11) |
variant.h l.119 |
SX126X_CS |
(32 + 13) |
variant.h l.114 |
SX126X_DIO1 |
(32 + 10) |
variant.h l.115 |
SX126X_POWER_EN |
37 |
nano-g2.h l.20 |
SX126X_RESET |
(32 + 15) |
variant.h l.120 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(0 + 15) |
variant.h l.89 |
PIN_WIRE_SDA |
(0 + 17) |
variant.h l.88 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(32 + 9) |
variant.h l.157 |
PIN_SPI_MOSI |
(0 + 11) |
variant.h l.158 |
PIN_SPI_SCK |
(0 + 12) |
variant.h l.159 |
GPS
| Signal | Value | Source |
|---|---|---|
GPS_RX_PIN |
PIN_GPS_RX |
variant.h l.139 |
GPS_TX_PIN |
PIN_GPS_TX |
variant.h l.140 |
PIN_GPS_RX |
(0 + 10) |
variant.h l.138 |
PIN_GPS_STANDBY |
(0 + 13) |
variant.h l.136 |
PIN_GPS_TX |
(0 + 9) |
variant.h l.137 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
nano-g2.h l.24 |
PIN_BUTTON1 |
(32 + 6) |
nano-g2.h l.23 |
PIN_LED1 |
(-1) |
variant.h l.46 |
PIN_LED2 |
(-1) |
variant.h l.47 |
PIN_LED3 |
(-1) |
variant.h l.48 |
PIN_USER_BTN |
BUTTON_PIN |
nano-g2.h l.25 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
PIN_A4 |
variant.h l.71 |
PIN_VBAT_READ |
(0 + 2) |
nano-g2.h l.35 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.41 |
PINS_COUNT |
(48) |
variant.h l.40 |
PIN_A4 |
(0 + 2) |
variant.h l.69 |
PIN_BUZZER |
4 |
platformio.ini l.73 |
PIN_QSPI_CS |
(32 + 7) |
variant.h l.99 |
PIN_QSPI_IO0 |
(0 + 6) |
variant.h l.100 |
PIN_QSPI_IO1 |
(0 + 26) |
variant.h l.101 |
PIN_QSPI_IO2 |
(32 + 4) |
variant.h l.102 |
PIN_QSPI_IO3 |
(32 + 2) |
variant.h l.103 |
PIN_QSPI_SCK |
(0 + 8) |
variant.h l.98 |
PIN_RTC_INT |
(0 + 14) |
variant.h l.91 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.145 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.146 |
PIN_SERIAL2_RX |
(0 + 22) |
variant.h l.80 |
PIN_SERIAL2_TX |
(0 + 20) |
variant.h l.81 |
promicro¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(16) |
variant.h l.88 |
P_LORA_DIO_1 |
(11) |
variant.h l.86 |
P_LORA_MISO |
(15) |
variant.h l.89 |
P_LORA_MOSI |
(14) |
variant.h l.91 |
P_LORA_NSS |
(13) |
variant.h l.85 |
P_LORA_RESET |
(10) |
variant.h l.87 |
P_LORA_SCLK |
(12) |
variant.h l.90 |
SX126X_POWER_EN |
(21) |
variant.h l.92 |
SX126X_RXEN |
(2) |
variant.h l.93 |
SX126X_TXEN |
(-1) |
variant.h l.94 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
7 |
platformio.ini l.13 |
PIN_BOARD_SDA |
8 |
platformio.ini l.14 |
PIN_WIRE_SCL |
(7) |
variant.h l.48 |
PIN_WIRE_SDA |
(6) |
variant.h l.47 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(19) |
variant.h l.64 |
PIN_SPI1_MOSI |
(20) |
variant.h l.65 |
PIN_SPI1_SCK |
(18) |
variant.h l.63 |
PIN_SPI_MISO |
(3) |
variant.h l.58 |
PIN_SPI_MOSI |
(4) |
variant.h l.59 |
PIN_SPI_NSS |
(5) |
variant.h l.61 |
PIN_SPI_SCK |
(2) |
variant.h l.57 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
5 |
platformio.ini l.19 |
PIN_GPS_RX |
3 |
platformio.ini l.17 |
PIN_GPS_TX |
4 |
platformio.ini l.18 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.80 |
LED_PIN |
PIN_LED |
variant.h l.71 |
PIN_BUTTON1 |
(6) |
variant.h l.79 |
PIN_LED |
(22) |
variant.h l.70 |
PIN_USER_BTN |
6 |
platformio.ini l.16 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(17) |
variant.h l.25 |
PIN_VBAT_READ |
17 |
PromicroBoard.h l.7 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(23) |
variant.h l.32 |
PINS_COUNT |
(23) |
variant.h l.31 |
PIN_EXT_VCC |
(21) |
variant.h l.22 |
PIN_OLED_RESET |
-1 |
platformio.ini l.15 |
PIN_SERIAL1_RX |
(0) |
variant.h l.40 |
PIN_SERIAL1_TX |
(1) |
variant.h l.39 |
PIN_WIRE1_SCL |
(14) |
variant.h l.50 |
PIN_WIRE1_SDA |
(13) |
variant.h l.49 |
rak3401¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
SX126X_BUSY |
variant.h l.175 |
P_LORA_DIO_1 |
SX126X_DIO1 |
variant.h l.174 |
P_LORA_MISO |
PIN_SPI1_MISO |
variant.h l.171 |
P_LORA_MOSI |
PIN_SPI1_MOSI |
variant.h l.172 |
P_LORA_NSS |
SX126X_CS |
variant.h l.173 |
P_LORA_RESET |
SX126X_RESET |
variant.h l.176 |
P_LORA_SCLK |
PIN_SPI1_SCK |
variant.h l.170 |
SX126X_BUSY |
(9) |
variant.h l.155 |
SX126X_CS |
(26) |
variant.h l.153 |
SX126X_DIO1 |
(10) |
variant.h l.154 |
SX126X_POWER_EN |
(21) |
variant.h l.164 |
SX126X_REGISTER_PATCH |
1 |
platformio.ini l.15 |
SX126X_RESET |
(4) |
variant.h l.156 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(WB_I2C1_SCL) |
variant.h l.136 |
PIN_WIRE_SDA |
(WB_I2C1_SDA) |
variant.h l.135 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(29) |
variant.h l.121 |
PIN_SPI1_MOSI |
(30) |
variant.h l.122 |
PIN_SPI1_SCK |
(3) |
variant.h l.123 |
PIN_SPI_MISO |
(45) |
variant.h l.117 |
PIN_SPI_MOSI |
(44) |
variant.h l.118 |
PIN_SPI_SCK |
(43) |
variant.h l.119 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_1PPS |
PIN_GPS_PPS |
variant.h l.194 |
PIN_GPS_PPS |
(17) |
variant.h l.189 |
PIN_GPS_RX |
PIN_SERIAL1_RX |
variant.h l.191 |
PIN_GPS_TX |
PIN_SERIAL1_TX |
variant.h l.192 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_LED1 |
(35) |
variant.h l.48 |
PIN_LED2 |
(36) |
variant.h l.49 |
PIN_USER_BTN_ANA |
31 |
platformio.ini l.66 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
PIN_A0 |
variant.h l.200 |
PIN_VBAT_READ |
5 |
RAK3401Board.h l.8 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.43 |
PINS_COUNT |
(48) |
variant.h l.42 |
PIN_3V3_EN |
(34) |
RAK3401Board.h l.11 |
PIN_A0 |
(5) |
variant.h l.62 |
PIN_A1 |
(31) |
variant.h l.63 |
PIN_A2 |
(28) |
variant.h l.64 |
PIN_A3 |
(29) |
variant.h l.65 |
PIN_A4 |
(30) |
variant.h l.66 |
PIN_A5 |
(31) |
variant.h l.67 |
PIN_A6 |
(0xff) |
variant.h l.68 |
PIN_A7 |
(0xff) |
variant.h l.69 |
PIN_AREF |
(2) |
variant.h l.93 |
PIN_NFC1 |
(9) |
variant.h l.94 |
PIN_NFC2 |
(10) |
variant.h l.97 |
PIN_QSPI_CS |
26 |
variant.h l.141 |
PIN_QSPI_IO0 |
30 |
variant.h l.142 |
PIN_QSPI_IO1 |
29 |
variant.h l.143 |
PIN_QSPI_IO2 |
28 |
variant.h l.144 |
PIN_QSPI_IO3 |
2 |
variant.h l.145 |
PIN_QSPI_SCK |
3 |
variant.h l.140 |
PIN_SERIAL1_RX |
(15) |
variant.h l.105 |
PIN_SERIAL1_TX |
(16) |
variant.h l.106 |
PIN_SERIAL2_RX |
(8) |
variant.h l.109 |
PIN_SERIAL2_TX |
(6) |
variant.h l.110 |
rak4631¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(46) |
variant.h l.151 |
P_LORA_DIO_1 |
(47) |
variant.h l.148 |
P_LORA_MISO |
(45) |
variant.h l.153 |
P_LORA_MOSI |
(44) |
variant.h l.154 |
P_LORA_NSS |
(42) |
variant.h l.149 |
P_LORA_RESET |
(38) |
variant.h l.150 |
P_LORA_SCLK |
(43) |
variant.h l.152 |
SX126X_POWER_EN |
(37) |
variant.h l.155 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
14 |
platformio.ini l.13 |
PIN_BOARD_SDA |
13 |
platformio.ini l.14 |
PIN_WIRE_SCL |
(14) |
variant.h l.166 |
PIN_WIRE_SDA |
(13) |
variant.h l.165 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(29) |
variant.h l.138 |
PIN_SPI_MOSI |
(30) |
variant.h l.139 |
PIN_SPI_SCK |
(3) |
variant.h l.140 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_1PPS |
17 |
variant.h l.185 |
PIN_GPS_EN |
-1 |
platformio.ini l.17 |
PIN_GPS_RX |
PIN_SERIAL1_TX |
platformio.ini l.16 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
platformio.ini l.15 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_LED1 |
(35) |
variant.h l.69 |
PIN_LED2 |
(36) |
variant.h l.70 |
PIN_USER_BTN |
9 |
platformio.ini l.163 |
PIN_USER_BTN_ANA |
31 |
platformio.ini l.164 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
5 |
RAK4631Board.h l.8 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.64 |
PINS_COUNT |
(48) |
variant.h l.63 |
PIN_A0 |
(5) |
variant.h l.88 |
PIN_A1 |
(31) |
variant.h l.89 |
PIN_A2 |
(28) |
variant.h l.90 |
PIN_A3 |
(29) |
variant.h l.91 |
PIN_A4 |
(30) |
variant.h l.92 |
PIN_A5 |
(31) |
variant.h l.93 |
PIN_A6 |
(0xff) |
variant.h l.94 |
PIN_A7 |
(0xff) |
variant.h l.95 |
PIN_AREF |
(2) |
variant.h l.116 |
PIN_NFC1 |
(9) |
variant.h l.117 |
PIN_NFC2 |
(10) |
variant.h l.118 |
PIN_OLED_RESET |
-1 |
platformio.ini l.18 |
PIN_QSPI_CS |
26 |
variant.h l.174 |
PIN_QSPI_IO0 |
30 |
variant.h l.175 |
PIN_QSPI_IO1 |
29 |
variant.h l.176 |
PIN_QSPI_IO2 |
28 |
variant.h l.177 |
PIN_QSPI_IO3 |
2 |
variant.h l.178 |
PIN_QSPI_SCK |
3 |
variant.h l.173 |
PIN_SERIAL1_RX |
(15) |
variant.h l.126 |
PIN_SERIAL1_TX |
(16) |
variant.h l.127 |
PIN_SERIAL2_RX |
(19) |
variant.h l.130 |
PIN_SERIAL2_TX |
(20) |
variant.h l.131 |
PIN_WIRE1_SCL |
(25) |
variant.h l.169 |
PIN_WIRE1_SDA |
(24) |
variant.h l.168 |
rak_wismesh_tag¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
(42) |
variant.h l.88 |
P_LORA_BUSY |
SX126X_BUSY |
platformio.ini l.15 |
P_LORA_DIO_1 |
SX126X_DIO1 |
platformio.ini l.12 |
P_LORA_MISO |
PIN_SPI_MISO |
platformio.ini l.17 |
P_LORA_MOSI |
PIN_SPI_MOSI |
platformio.ini l.18 |
P_LORA_NSS |
PIN_SPI_NSS |
platformio.ini l.13 |
P_LORA_RESET |
SX126X_RESET |
platformio.ini l.14 |
P_LORA_SCLK |
PIN_SPI_SCK |
platformio.ini l.16 |
P_LORA_TX_LED |
LED_GREEN |
platformio.ini l.11 |
SX126X_BUSY |
(46) |
variant.h l.90 |
SX126X_DIO1 |
(47) |
variant.h l.89 |
SX126X_POWER_EN |
(37) |
variant.h l.92 |
SX126X_RESET |
(38) |
variant.h l.91 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_BOARD_SCL |
PIN_WIRE_SCL |
platformio.ini l.27 |
PIN_BOARD_SDA |
PIN_WIRE_SDA |
platformio.ini l.26 |
PIN_WIRE_SCL |
(24) |
variant.h l.50 |
PIN_WIRE_SDA |
(25) |
variant.h l.49 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(29) |
variant.h l.99 |
PIN_SPI1_MOSI |
(30) |
variant.h l.100 |
PIN_SPI1_SCK |
(3) |
variant.h l.101 |
PIN_SPI_MISO |
(45) |
variant.h l.57 |
PIN_SPI_MOSI |
(44) |
variant.h l.58 |
PIN_SPI_NSS |
(42) |
variant.h l.60 |
PIN_SPI_SCK |
(43) |
variant.h l.59 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(34) |
variant.h l.114 |
PIN_GPS_PPS |
(17) |
variant.h l.113 |
PIN_GPS_RX |
(PIN_SERIAL1_TX) |
variant.h l.111 |
PIN_GPS_TX |
(PIN_SERIAL1_RX) |
variant.h l.112 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.78 |
LED_PIN |
LED_GREEN |
variant.h l.71 |
PIN_BUTTON1 |
(9) |
variant.h l.77 |
PIN_BUTTON2 |
(12) |
variant.h l.81 |
PIN_STATUS_LED |
LED_BLUE |
variant.h l.69 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.79 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(5) |
variant.h l.24 |
PIN_VBAT_READ |
5 |
RAKWismeshTagBoard.h l.8 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.36 |
PINS_COUNT |
(48) |
variant.h l.35 |
PIN_AREF |
(2) |
variant.h l.118 |
PIN_BUZZER |
(21) |
variant.h l.121 |
PIN_NFC1 |
(9) |
variant.h l.119 |
PIN_NFC2 |
(10) |
variant.h l.120 |
PIN_PWR_EN |
(12) |
variant.h l.22 |
PIN_SERIAL1_RX |
(15) |
variant.h l.43 |
PIN_SERIAL1_TX |
(16) |
variant.h l.44 |
PIN_TXCO |
(21) |
variant.h l.18 |
sensecap_solar¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
3 |
platformio.ini l.19 |
P_LORA_DIO_1 |
1 |
platformio.ini l.17 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.63 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.64 |
P_LORA_NSS |
4 |
platformio.ini l.20 |
P_LORA_RESET |
2 |
platformio.ini l.18 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.62 |
P_LORA_TX_LED |
12 |
platformio.ini l.16 |
SX126X_RXEN |
5 |
platformio.ini l.23 |
SX126X_TXEN |
RADIOLIB_NC |
platformio.ini l.24 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(15) |
variant.h l.70 |
PIN_WIRE_SDA |
(14) |
variant.h l.69 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(9) |
variant.h l.57 |
PIN_SPI_MOSI |
(10) |
variant.h l.58 |
PIN_SPI_SCK |
(8) |
variant.h l.59 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_RX |
PIN_SERIAL1_TX |
variant.h l.76 |
PIN_GPS_STANDBY |
(0) |
variant.h l.77 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
variant.h l.75 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(13) |
variant.h l.33 |
PIN_BUTTON2 |
(20) |
variant.h l.34 |
PIN_LED |
(12) |
variant.h l.21 |
PIN_USER_BTN |
PIN_BUTTON1 |
variant.h l.35 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(16) |
variant.h l.40 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(33) |
variant.h l.16 |
PINS_COUNT |
(33) |
variant.h l.15 |
PIN_QSPI_CS |
(22) |
variant.h l.82 |
PIN_QSPI_IO0 |
(23) |
variant.h l.83 |
PIN_QSPI_IO1 |
(24) |
variant.h l.84 |
PIN_QSPI_IO2 |
(25) |
variant.h l.85 |
PIN_QSPI_IO3 |
(26) |
variant.h l.86 |
PIN_QSPI_SCK |
(21) |
variant.h l.81 |
PIN_SERIAL1_RX |
(7) |
variant.h l.51 |
PIN_SERIAL1_TX |
(6) |
variant.h l.52 |
t1000-e¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_BUSY |
(7) |
variant.h l.97 |
LORA_DIO_1 |
(33) |
variant.h l.94 |
LORA_MISO |
(PIN_SPI_MISO) |
variant.h l.99 |
LORA_MOSI |
(PIN_SPI_MOSI) |
variant.h l.100 |
LORA_NSS |
(PIN_SPI_NSS) |
variant.h l.95 |
LORA_RESET |
(42) |
variant.h l.96 |
LORA_SCLK |
(PIN_SPI_SCK) |
variant.h l.98 |
P_LORA_BUSY |
7 |
platformio.ini l.21 |
P_LORA_DIO_1 |
33 |
platformio.ini l.24 |
P_LORA_MISO |
40 |
platformio.ini l.25 |
P_LORA_MOSI |
41 |
platformio.ini l.26 |
P_LORA_NSS |
12 |
platformio.ini l.23 |
P_LORA_RESET |
42 |
platformio.ini l.27 |
P_LORA_SCLK |
11 |
platformio.ini l.22 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(27) |
variant.h l.60 |
PIN_WIRE_SDA |
(26) |
variant.h l.59 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(40) |
variant.h l.70 |
PIN_SPI_MOSI |
(41) |
variant.h l.71 |
PIN_SPI_NSS |
(12) |
variant.h l.73 |
PIN_SPI_SCK |
(11) |
variant.h l.72 |
GPS
| Signal | Value | Source |
|---|---|---|
GPS_RX_PIN |
PIN_SERIAL1_RX |
variant.h l.109 |
GPS_TX_PIN |
PIN_SERIAL1_TX |
variant.h l.110 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.89 |
LED_PIN |
LED_GREEN |
variant.h l.81 |
PIN_BUTTON1 |
(6) |
variant.h l.88 |
PIN_STATUS_LED |
24 |
platformio.ini l.14 |
PIN_USER_BTN |
6 |
platformio.ini l.12 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(2) |
variant.h l.24 |
Other
| Signal | Value | Source |
|---|---|---|
BUZZER_PIN |
(25) |
variant.h l.136 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.40 |
PINS_COUNT |
(48) |
variant.h l.39 |
PIN_3V3_ACC_EN |
(39) |
variant.h l.130 |
PIN_3V3_EN |
(38) |
variant.h l.22 |
PIN_BUZZER |
25 |
platformio.ini l.83 |
PIN_BUZZER_EN |
37 |
platformio.ini l.84 |
PIN_SERIAL1_RX |
(14) |
variant.h l.47 |
PIN_SERIAL1_TX |
(13) |
variant.h l.48 |
PIN_SERIAL2_RX |
(17) |
variant.h l.50 |
PIN_SERIAL2_TX |
(16) |
variant.h l.51 |
QMA_6100P_INT_PIN |
(34) |
variant.h l.63 |
thinknode_m1¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_CS |
(24) |
variant.h l.94 |
P_LORA_BUSY |
17 |
platformio.ini l.16 |
P_LORA_DIO_1 |
20 |
platformio.ini l.13 |
P_LORA_MISO |
23 |
platformio.ini l.18 |
P_LORA_MOSI |
22 |
platformio.ini l.19 |
P_LORA_NSS |
24 |
platformio.ini l.14 |
P_LORA_RESET |
25 |
platformio.ini l.15 |
P_LORA_SCLK |
19 |
platformio.ini l.17 |
P_LORA_TX_LED |
13 |
platformio.ini l.26 |
SX126X_BUSY |
(17) |
variant.h l.96 |
SX126X_DIO1 |
(20) |
variant.h l.95 |
SX126X_POWER_EN |
37 |
platformio.ini l.20 |
SX126X_RESET |
(25) |
variant.h l.97 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(27) |
variant.h l.49 |
PIN_WIRE_SDA |
(26) |
variant.h l.48 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(38) |
variant.h l.104 |
PIN_SPI1_MOSI |
(29) |
variant.h l.105 |
PIN_SPI1_SCK |
(31) |
variant.h l.106 |
PIN_SPI_MISO |
(23) |
variant.h l.56 |
PIN_SPI_MOSI |
(22) |
variant.h l.57 |
PIN_SPI_NSS |
(24) |
variant.h l.59 |
PIN_SPI_SCK |
(19) |
variant.h l.58 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_PPS |
(36) |
variant.h l.141 |
PIN_GPS_RESET |
(37) |
variant.h l.140 |
PIN_GPS_RX |
(40) |
variant.h l.137 |
PIN_GPS_STANDBY |
(34) |
variant.h l.142 |
PIN_GPS_SWITCH |
(33) |
variant.h l.143 |
PIN_GPS_TX |
(41) |
variant.h l.138 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.81 |
LED_PIN |
LED_BUILTIN |
variant.h l.71 |
PIN_BUTTON1 |
(42) |
variant.h l.80 |
PIN_BUTTON2 |
(11) |
variant.h l.84 |
PIN_LED |
LED_BUILTIN |
variant.h l.70 |
PIN_STATUS_LED |
LED_GREEN |
variant.h l.68 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.82 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(4) |
variant.h l.24 |
PIN_VBAT_READ |
(4) |
ThinkNodeM1Board.h l.13 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.36 |
PINS_COUNT |
(48) |
variant.h l.35 |
PIN_BUZZER |
6 |
platformio.ini l.84 |
PIN_NEOPIXEL |
(14) |
variant.h l.74 |
PIN_PWR_EN |
(12) |
variant.h l.22 |
PIN_QSPI_CS |
(47) |
variant.h l.116 |
PIN_QSPI_IO0 |
(44) |
variant.h l.117 |
PIN_QSPI_IO1 |
(45) |
variant.h l.118 |
PIN_QSPI_IO2 |
(7) |
variant.h l.119 |
PIN_QSPI_IO3 |
(5) |
variant.h l.120 |
PIN_QSPI_SCK |
(46) |
variant.h l.115 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.43 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.44 |
PIN_TXCO |
(21) |
variant.h l.18 |
thinknode_m3¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
43 |
platformio.ini l.19 |
P_LORA_DIO_1 |
40 |
platformio.ini l.22 |
P_LORA_MISO |
47 |
platformio.ini l.23 |
P_LORA_MOSI |
46 |
platformio.ini l.24 |
P_LORA_NSS |
44 |
platformio.ini l.21 |
P_LORA_RESET |
42 |
platformio.ini l.25 |
P_LORA_SCLK |
45 |
platformio.ini l.20 |
P_LORA_TX_LED |
PIN_LED_BLUE |
platformio.ini l.26 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(27) |
variant.h l.60 |
PIN_WIRE_SDA |
(26) |
variant.h l.59 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(47) |
variant.h l.68 |
PIN_SPI_MOSI |
(46) |
variant.h l.69 |
PIN_SPI_NSS |
(44) |
variant.h l.71 |
PIN_SPI_SCK |
(45) |
variant.h l.70 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(21) |
variant.h l.99 |
PIN_GPS_POWER |
(14) |
variant.h l.98 |
PIN_GPS_RESET |
(25) |
variant.h l.100 |
PIN_GPS_RX |
(22) |
variant.h l.95 |
PIN_GPS_TX |
(20) |
variant.h l.96 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.89 |
LED_PIN |
PIN_LED_GREEN |
variant.h l.81 |
PIN_BUTTON1 |
(12) |
variant.h l.88 |
PIN_LED_BLUE |
(37) |
variant.h l.78 |
PIN_LED_GREEN |
(35) |
variant.h l.79 |
PIN_LED_RED |
(33) |
variant.h l.80 |
PIN_STATUS_LED |
35 |
platformio.ini l.13 |
PIN_USER_BTN |
12 |
platformio.ini l.12 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(5) |
variant.h l.35 |
Other
| Signal | Value | Source |
|---|---|---|
BUZZER_PIN |
(25) |
variant.h l.110 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.22 |
PINS_COUNT |
(48) |
variant.h l.21 |
PIN_BUZZER |
23 |
platformio.ini l.84 |
PIN_BUZZER_EN |
36 |
platformio.ini l.85 |
PIN_PWR_EN |
(16) |
variant.h l.44 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.50 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.51 |
thinknode_m6¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
43 |
platformio.ini l.18 |
P_LORA_DIO_1 |
38 |
platformio.ini l.15 |
P_LORA_MISO |
47 |
platformio.ini l.20 |
P_LORA_MOSI |
46 |
platformio.ini l.21 |
P_LORA_NSS |
44 |
platformio.ini l.16 |
P_LORA_RESET |
42 |
platformio.ini l.17 |
P_LORA_SCLK |
45 |
platformio.ini l.19 |
P_LORA_TX_LED |
PIN_LED_BLUE |
platformio.ini l.27 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(8) |
variant.h l.53 |
PIN_WIRE_SDA |
(41) |
variant.h l.52 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(47) |
variant.h l.60 |
PIN_SPI_MOSI |
(46) |
variant.h l.61 |
PIN_SPI_SCK |
(45) |
variant.h l.62 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(6) |
variant.h l.104 |
PIN_GPS_PPS |
(31) |
variant.h l.112 |
PIN_GPS_RESET |
(29) |
variant.h l.105 |
PIN_GPS_RX |
(2) |
variant.h l.102 |
PIN_GPS_STANDBY |
(30) |
variant.h l.111 |
PIN_GPS_TX |
(3) |
variant.h l.103 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.81 |
LED_PIN |
LED_BUILTIN |
variant.h l.74 |
PIN_BUTTON1 |
(17) |
variant.h l.80 |
PIN_LED |
LED_BUILTIN |
variant.h l.73 |
PIN_LED_BLUE |
(7) |
variant.h l.69 |
PIN_LED_RED |
(12) |
variant.h l.68 |
PIN_USER_BTN |
BUTTON_PIN |
variant.h l.82 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(28) |
variant.h l.23 |
PIN_VBAT_READ |
BATTERY_PIN |
ThinkNodeM6Board.h l.12 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(48) |
variant.h l.36 |
PINS_COUNT |
(48) |
variant.h l.35 |
PIN_ADC_CTRL |
(11) |
variant.h l.25 |
PIN_PWR_EN |
(27) |
variant.h l.21 |
PIN_QSPI_CS |
(23) |
variant.h l.91 |
PIN_QSPI_IO0 |
(33) |
variant.h l.92 |
PIN_QSPI_IO1 |
(34) |
variant.h l.93 |
PIN_QSPI_IO2 |
(36) |
variant.h l.94 |
PIN_QSPI_IO3 |
(37) |
variant.h l.95 |
PIN_QSPI_SCK |
(35) |
variant.h l.90 |
PIN_SERIAL1_RX |
PIN_GPS_TX |
variant.h l.43 |
PIN_SERIAL1_TX |
PIN_GPS_RX |
variant.h l.44 |
PIN_SERIAL2_RX |
(22) |
variant.h l.46 |
PIN_SERIAL2_TX |
(24) |
variant.h l.47 |
wio-tracker-l1¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
(3) |
variant.h l.70 |
P_LORA_DIO_1 |
(1) |
variant.h l.68 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.66 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.67 |
P_LORA_NSS |
(4) |
variant.h l.71 |
P_LORA_RESET |
(2) |
variant.h l.69 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.65 |
P_LORA_TX_LED |
PIN_LED |
variant.h l.24 |
SX126X_RXEN |
(5) |
variant.h l.72 |
SX126X_TXEN |
RADIOLIB_NC |
variant.h l.73 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(15) |
variant.h l.81 |
PIN_WIRE_SDA |
(14) |
variant.h l.80 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(37) |
variant.h l.111 |
PIN_SPI1_MOSI |
(33) |
variant.h l.112 |
PIN_SPI1_SCK |
(31) |
variant.h l.113 |
PIN_SPI_MISO |
(9) |
variant.h l.60 |
PIN_SPI_MOSI |
(10) |
variant.h l.61 |
PIN_SPI_SCK |
(8) |
variant.h l.62 |
Display
| Signal | Value | Source |
|---|---|---|
PIN_DISPLAY_BUSY |
(35) |
variant.h l.107 |
PIN_DISPLAY_CS |
(36) |
variant.h l.106 |
PIN_DISPLAY_DC |
(34) |
variant.h l.108 |
PIN_DISPLAY_RST |
(32) |
variant.h l.109 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_EN |
(PIN_GPS_STANDBY) |
variant.h l.92 |
PIN_GPS_RX |
PIN_SERIAL1_TX |
variant.h l.90 |
PIN_GPS_STANDBY |
(0) |
variant.h l.91 |
PIN_GPS_TX |
PIN_SERIAL1_RX |
variant.h l.89 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(13) |
variant.h l.28 |
PIN_BUTTON2 |
(25) |
variant.h l.29 |
PIN_BUTTON3 |
(26) |
variant.h l.30 |
PIN_BUTTON4 |
(27) |
variant.h l.31 |
PIN_BUTTON5 |
(28) |
variant.h l.32 |
PIN_BUTTON6 |
(29) |
variant.h l.33 |
PIN_LED |
(11) |
variant.h l.21 |
PIN_USER_BTN |
PIN_BUTTON6 |
variant.h l.40 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT_READ |
(16) |
variant.h l.48 |
Other
| Signal | Value | Source |
|---|---|---|
ENV_PIN_SCL |
PIN_WIRE1_SCL |
platformio.ini l.102 |
ENV_PIN_SDA |
PIN_WIRE1_SDA |
platformio.ini l.101 |
NUM_DIGITAL_PINS |
(38) |
variant.h l.16 |
PINS_COUNT |
(38) |
variant.h l.15 |
PIN_BACK_BTN |
PIN_BUTTON1 |
variant.h l.34 |
PIN_BUZZER |
12 |
platformio.ini l.69 |
PIN_OLED_RESET |
-1 |
platformio.ini l.17 |
PIN_QSPI_CS |
(20) |
variant.h l.96 |
PIN_QSPI_IO0 |
(21) |
variant.h l.97 |
PIN_QSPI_IO1 |
(22) |
variant.h l.98 |
PIN_QSPI_IO2 |
(23) |
variant.h l.99 |
PIN_QSPI_IO3 |
(24) |
variant.h l.100 |
PIN_QSPI_SCK |
(19) |
variant.h l.95 |
PIN_SERIAL1_RX |
(7) |
variant.h l.54 |
PIN_SERIAL1_TX |
(6) |
variant.h l.55 |
PIN_WIRE1_SCL |
(17) |
variant.h l.83 |
PIN_WIRE1_SDA |
(18) |
variant.h l.82 |
wio-tracker-l1-eink¶
Other
| Signal | Value | Source |
|---|---|---|
ENV_PIN_SCL |
PIN_WIRE1_SCL |
platformio.ini l.29 |
ENV_PIN_SDA |
PIN_WIRE1_SDA |
platformio.ini l.28 |
PIN_BUZZER |
12 |
platformio.ini l.54 |
PIN_OLED_RESET |
-1 |
platformio.ini l.18 |
wio_wm1110¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
LORA_BUSY |
(43) |
variant.h l.96 |
LORA_CS |
PIN_SPI_NSS |
variant.h l.100 |
LORA_DIO_1 |
(40) |
variant.h l.93 |
LORA_MISO |
(PIN_SPI_MISO) |
variant.h l.98 |
LORA_MOSI |
(PIN_SPI_MOSI) |
variant.h l.99 |
LORA_NSS |
(PIN_SPI_NSS) |
variant.h l.94 |
LORA_RESET |
(42) |
variant.h l.95 |
LORA_SCLK |
(PIN_SPI_SCK) |
variant.h l.97 |
P_LORA_BUSY |
43 |
platformio.ini l.19 |
P_LORA_DIO_1 |
40 |
platformio.ini l.17 |
P_LORA_MISO |
47 |
platformio.ini l.23 |
P_LORA_MOSI |
46 |
platformio.ini l.22 |
P_LORA_NSS |
44 |
platformio.ini l.20 |
P_LORA_RESET |
42 |
platformio.ini l.18 |
P_LORA_SCLK |
45 |
platformio.ini l.21 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
(26) |
variant.h l.52 |
PIN_WIRE_SDA |
(27) |
variant.h l.51 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI_MISO |
(47) |
variant.h l.68 |
PIN_SPI_MOSI |
(46) |
variant.h l.69 |
PIN_SPI_NSS |
(44) |
variant.h l.71 |
PIN_SPI_SCK |
(45) |
variant.h l.70 |
GPS
| Signal | Value | Source |
|---|---|---|
PIN_GPS_RX |
(-1) |
variant.h l.142 |
PIN_GPS_TX |
(-1) |
variant.h l.141 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
BUTTON_PIN |
PIN_BUTTON1 |
variant.h l.88 |
LED_PIN |
LED_GREEN |
variant.h l.80 |
PIN_BUTTON1 |
(-1) |
variant.h l.87 |
Power and battery
| Signal | Value | Source |
|---|---|---|
BATTERY_PIN |
(31) |
variant.h l.19 |
Other
| Signal | Value | Source |
|---|---|---|
LIS3DH_INT_PIN_1 |
(11) |
variant.h l.58 |
LIS3DH_INT_PIN_2 |
(12) |
variant.h l.59 |
LR1110_BUSY_PIN |
LORA_BUSY |
variant.h l.110 |
LR1110_GNSS_ANT_PIN |
(37) |
variant.h l.105 |
LR1110_IRQ_PIN |
LORA_DIO_1 |
variant.h l.108 |
LR1110_NRESET_PIN |
LORA_RESET |
variant.h l.109 |
LR1110_SPI_MISO_PIN |
LORA_MISO |
variant.h l.114 |
LR1110_SPI_MOSI_PIN |
LORA_MOSI |
variant.h l.113 |
LR1110_SPI_NSS_PIN |
LORA_CS |
variant.h l.111 |
LR1110_SPI_SCK_PIN |
LORA_SCLK |
variant.h l.112 |
NUM_DIGITAL_PINS |
(48) |
variant.h l.32 |
PINS_COUNT |
(48) |
variant.h l.31 |
PIN_SERIAL1_RX |
(22) |
variant.h l.39 |
PIN_SERIAL1_TX |
(24) |
variant.h l.40 |
PIN_SERIAL2_RX |
(6) |
variant.h l.42 |
PIN_SERIAL2_TX |
(8) |
variant.h l.43 |
SENSOR_POWER_PIN |
(7) |
variant.h l.55 |
xiao_nrf52¶
LoRa radio
| Signal | Value | Source |
|---|---|---|
P_LORA_BUSY |
D3 |
platformio.ini l.21 |
P_LORA_DIO_1 |
D1 |
platformio.ini l.19 |
P_LORA_MISO |
PIN_SPI_MISO |
variant.h l.123 |
P_LORA_MOSI |
PIN_SPI_MOSI |
variant.h l.124 |
P_LORA_NSS |
D4 |
platformio.ini l.22 |
P_LORA_RESET |
D2 |
platformio.ini l.20 |
P_LORA_SCLK |
PIN_SPI_SCK |
variant.h l.122 |
P_LORA_TX_LED |
11 |
platformio.ini l.18 |
SX126X_RXEN |
D5 |
platformio.ini l.23 |
SX126X_TXEN |
RADIOLIB_NC |
platformio.ini l.24 |
I2C
| Signal | Value | Source |
|---|---|---|
PIN_WIRE_SCL |
D6 |
platformio.ini l.29 |
PIN_WIRE_SDA |
D7 |
platformio.ini l.30 |
SPI
| Signal | Value | Source |
|---|---|---|
PIN_SPI1_MISO |
(25) |
variant.h l.117 |
PIN_SPI1_MOSI |
(26) |
variant.h l.118 |
PIN_SPI1_SCK |
(29) |
variant.h l.119 |
PIN_SPI_MISO |
(9) |
variant.h l.113 |
PIN_SPI_MOSI |
(10) |
variant.h l.114 |
PIN_SPI_SCK |
(8) |
variant.h l.115 |
Buttons and LED
| Signal | Value | Source |
|---|---|---|
PIN_BUTTON1 |
(0) |
variant.h l.42 |
PIN_LED |
(LED_RED) |
variant.h l.27 |
PIN_STATUS_LED |
(LED_BLUE) |
variant.h l.37 |
PIN_USER_BTN |
PIN_BUTTON1 |
platformio.ini l.31 |
Power and battery
| Signal | Value | Source |
|---|---|---|
PIN_VBAT |
(32) |
variant.h l.70 |
Other
| Signal | Value | Source |
|---|---|---|
NUM_DIGITAL_PINS |
(33) |
variant.h l.22 |
PINS_COUNT |
(33) |
variant.h l.21 |
PIN_A0 |
(0) |
variant.h l.64 |
PIN_A1 |
(1) |
variant.h l.65 |
PIN_A2 |
(2) |
variant.h l.66 |
PIN_A3 |
(3) |
variant.h l.67 |
PIN_A4 |
(4) |
variant.h l.68 |
PIN_A5 |
(5) |
variant.h l.69 |
PIN_CHARGING_CURRENT |
(22) |
variant.h l.60 |
PIN_LSM6DS3TR_C_INT1 |
(18) |
variant.h l.138 |
PIN_LSM6DS3TR_C_POWER |
(15) |
variant.h l.137 |
PIN_NEOPIXEL |
(PINS_COUNT) |
variant.h l.29 |
PIN_NFC1 |
(30) |
variant.h l.103 |
PIN_NFC2 |
(31) |
variant.h l.104 |
PIN_PDM_CLK |
(20) |
variant.h l.142 |
PIN_PDM_DIN |
(21) |
variant.h l.143 |
PIN_PDM_PWR |
(19) |
variant.h l.141 |
PIN_QSPI_CS |
(25) |
variant.h l.147 |
PIN_QSPI_IO0 |
(26) |
variant.h l.148 |
PIN_QSPI_IO1 |
(27) |
variant.h l.149 |
PIN_QSPI_IO2 |
(28) |
variant.h l.150 |
PIN_QSPI_IO3 |
(29) |
variant.h l.151 |
PIN_QSPI_SCK |
(24) |
variant.h l.146 |
PIN_SERIAL1_RX |
(7) |
variant.h l.107 |
PIN_SERIAL1_TX |
(6) |
variant.h l.108 |
Sources¶
variants/— 36 directories of this family, each with aplatformio.iniand the headers beside ittools/variant-pins.py— the script that builds these tables
Related in this documentation:
- Node matrix — which devices you can buy
- MeshCore Platforms — why the platform matters
- The four platform families — what sits inside the chip per family